Hummm, who's to say ten years down the road, or sooner, the Omni VII doesn't have a logic board problem? mike bryce wb8vge prosolar@sssnet.com _______________________________________________ TenTec m
Lee, you're absolutely right! but... I still paid for a 100 watt radio. I shouldn't have to tweak and peak the trimmers inside to set the power correctly. The omni VI I own shows about 80 watts give
I'll keep this short as two thumb typing is hard to do. I understand the electronic aspect of it as well as the tolerance and logarithm of real power in the real world. Please, please, please underst
The radio is a few years old. And has done this since day one. It's a keeper. I like the radio. I own over thirty rigs made by TT. The omni 7 is not sold as mil spec. It's nor priced at mil spec eith
I have access to a very expensive motorla comm analyzer. $50k, calibrated to traceable standards. My personal coaxial dynamic watt meter and if course a 50 ohm dummy load. So, I am not using an old r
yes, calibrated dummy load HP calibrated voltmeter comm analyzer rated for HF use Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p o|||||||o A man with o
Don't shoot me! But I always read that open line feed was lossless. Mike Sent from my iPhone _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.con
Okay... So what I just read from the link you sent, if I take and put up a center fed Zepp with 66 feet on each side, fed with 450 open line and assume no loss from the tuner or balun that antenna wo
seems clear to me mike bryce prosolar@sssnet.com _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
this may sound simple, but there's a jumper in the back that goes 'vfo in--vfo out' make sure the jumper is in place and seated tightly without it, the counter won't display correctly (radio won't wo
Do you hear the sidetone or just the pops and clicks? If you don't hear the sidetone, those pops are the sidetone. If that's the case, a capacitor on the board that holds the af/rf pots needs pulled.
Boys and girls I have 705 microphone, but the foam ball has long ago been lost/eaten/stolen/ or used as a dog toy. Any one know of a source for such a thing? mike Mike, WB8VGE SunLight Energy Systems
Crap! What impresses me the most is Steve taught himself PIC assembler programming in a weekend! Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p o||||||
steve and all, I have the capacity to design, layout and build double sided pcbs so, don't let that keep you from moving forward. I'll be more than happy to lay out the pcb and do the prototypes mike
I think he wants keyboard control WITHOUT a computer, just the keyboard Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e e p o|||||||o "If the facts don't fi
Right, but you still need a computer running your software and a rs232 cable between the computer and radio. Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.theheathkitshop.com/ J e
just a long shot, but you can indeed, with the current firmware, plug in a keyboard into a Jupiter and work cw without a pc. You can't control the functions of the radio by any means, but you can sen
RF parts sells high voltage wire a good (really good) test lead wire will work. strip off the shield of a RG-8 and that will work call the factory and have a hunk sent to you. mike Mike, WB8VGE SunLi
I don't have a CII but what the hay... one pcb and PIC (programmed!) and to echo the question how and to whom gets the $$$ mike Mike, WB8VGE SunLight Energy Systems The Heathkit Shop http://www.thehe
Alc diodes in the swr board. Sent from my iPhone _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec