I used POR-15 - the gray version on some Rohn 45 about 4 years ago. It goes on well and has done what was advertised. Make sure the surface is clean and you will be satisfied with the end result. Whe
Folks, I've acquired an older 2800 and need of some documentation. I say older because the rotor looks about the same as the current 2800 but the control box has a small toggle switch for power, a ro
I've been ordering parts for 2 towers over the past few months from Hill. They are great folks to work with but be aware that the prices on their website are not up to date. Make sure that you call a
Folks, I'm in the process of rebuilding my station and am in need of a 2 ele 40m yagi. In the past I had an old 40-2CD by Cushcraft on the tower. In shopping around I have looked at: XM240 Force 12 (
Saw this today, on eBay of all places. Take a look at eBay item: 250221413049 Or, do a general search on eBay for Industrial Communications Engineers.........starting bid, $2.7M. Greg K9IG __________
Just got a CC XM-240 together and on the tower. I'm having some tuning issues. There are CW, MID and SSB settings on the elements and I split the difference per some of the other posts that I have se
Hi Folks, Here is what I found and THANKS to all who replied via the reflector and direct. Several comments came out about my stating there is a "matching network". That's Cuscraft's nomenclature, no
Anyone have a trashed A4S laying around that is being parted-out ? Maybe have some driven element traps ? I have everything BUT the DE here. Thanks, Greg K9IG ______________________________________
Folks, I'm putting together a used F12 antenna here. I have a manual, it covers the C3 and C3D. As I'm putting it together, I see that I have an extra element, so, I have either a C3E or a C4 and my
OOPS - I left out an element There really are 8 elements on the boom: 20m ref 15m ref 10m ref 15m rear driver 20m driver - feedpoint 10m front driver 10m driver 10 m director Greg K9IG Hi Greg,
Thanks for all of the replies folks - it's a C3E and I got the dims (tnx AA4NU!) Greg K9IG OOPS - I left out an element There really are 8 elements on the boom: 20m ref 15m ref 10m ref 15m rear d
Hey guys - ICE is not a 1 man business. There are others involved, one being Mike's brother Bob, who is an active Ham. I'm sure that once the shock of the loss is over for the family, there will be s
Depending on the size needed I used a truckbed "Job Box". A big box that is typically mounted in the bed of a pickup to hold tools. Attached is a link to some pics when it was just going in at our ho
Hi Larry - I've seen that seen many times through the years, wondering the same thing. I did a bit of looking and have found that the home is located here: 2310 N Vermont Ave, Los Angeles, CA 90027