Doc, I'd be happy to help. If you 'll provide a phone #, I'll try. I apologise in advance if I have inadvertently sent this note twice. But maybe someone can help me with an ailing Tentec Omni 5. It
I've finally become motivated (and have the time) to perform the TT Wiki audio hiss mod to my two Corsair II's. Before I order the chip carriers complete with the OPA2134's from Cimarron, is there an
Dick, Yes, I've procrastinated installing the audio mod for too long, but finally have my backlog of "must do's" put to bed. I thought I'd check with the TT group before ordering from Cimarron, since
The power connector on your OMNI is AMP Mate-n-Lok, and is available from Mouser, Digikey and others. 73, Allen--W7GIF -- Original Message -- From: tfr001@myfairpoint.net<mailto:tfr001@myfairpoint.ne
Tom, What are you using for a power supply? The Ten Tec 255 (companion supply for OMNI-X's) and 280 supplies provide overvoltage protection. The 251 and 252 supplies do not provide ovp. TenTec did of
Is the Vibroplex actually a "Bug" (2 binding posts, and adjustable armature weight), or a "Paddle" (3 binding posts/terminals, and no armature weight)? If it's a paddle, use a 1/8" stereo plug in the
If it's like the 565, that's the mic amp gain. What is the pot that has a cutout on the bottom of the Orion II. I have looked at the manual but if its purpose is there I missed it. Thanks Gary K4MT _
The jumper cables are RG174 fitted with TMP connectors. Gary Follett-W0DVN (dukeshifi) posted on this forum within the past two weeks, that he has an ample supply of those jumpers available. 73, Alle
Alan, Try Gary W0DVN at dukeshifi@comcast.net<mailto:dukeshifi@comcast.net> for an OEM "pull" encoder. Got a pulled VFO encoder from him last year for my 565, and it worked fb. Allen--W7GIF -- Origin
Gary, Heads up for paypal $45 for one oven for me. See direct email to you re additional 565 part. Since I need three myself, I am willing to lead this. I ownt place an order until I have payment to
That O II fuse is a BUSS (mfr), their p/n is ATM-25. Allen--W7GIF -- Original Message -- From: Charles Lewis<mailto:xanthi@skybest.com> To: tentec@contesting.com<mailto:tentec@contesting.com> Sent: W
Bob, Yes, at least some...or,maybe all...546-C's have a lighted index line on the dial escutcheon (at least thru s/n 35xx, which I have). To the best of my knowledge, all 546-C's have digital readout
I have both Craftsman and Bondhus wrenches in both SAE and metric. The SAE 1/16" wrenches mic at 0.061, and the metric 1.5mm wrenches mic at 0.059. Either one should work nicely on your Argosy. Allen
What's being used to measure output power? Measured using dummy load or ?? Enough mic gain to achieve blinking ALC led? What is the CW key-down power? I have an Orion I. Recently I traded with anothe
Sure is quiet. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Thanks Dale. It's curious that I'm not receiving (back) my posts. An MSN mail "anomaly"? -- Original Message -- From: Dale Putnam<mailto:daleputnam@hotmail.com> To: tentec@contesting.com<mailto:tente
Rick, You may find that when using the MSFT email client, that at the bottom of every message where the link to this site was a 1/2 line of characters, it will now be 4-5 lines of one helluva lot of
I acquired a very pristine (looking) 585 last weekend at a hamfest. It has absolutely no cosmetic flaws or evidence of use/wear. Maybe thats because it suffers from a sporadic failure mode that corru
One of the reasons Im hooked on TenTec radios, is the generous support available from experienced owners. Many thanks to all who have responded to my request for help on the Paragon (Vic, Barry, Tony
After more than three years of faithful, dependable service, the 9425 power supply gave up. T-shhoting revealed that R2 on the 81212 Rectifier had opened (big crater). According to the manual schemat