Are there copies of the Engineering drawings for the US Tower HDX-589 and 572 on-line? US Towers website has the foundation....But I did not see the actual tower drawings? Thanks... Rich N7TR _______
Looking for anyone on the list who has obtained 85 MPH "C" calcs for the HDX-589 and 572 Towers? Have been requesting info from US Towers for a few weeks, but their engineers must be busy as I have n
I have an existing Concrete foundation (13Yds of 4000 PSI Concrete) that I need to install Anchor Bolts for an HDX-572. I have read in the archives some mention of Epoxy and Mechanical Anchors. Let m
I know this has been asked before and looking for places I can buy the foundation bolts for an HDX-589. This also includes the Bolts that connect the tower to the base place. I think there are 12 of
Has anyone successfully converted one of the other Yaesu, Create, Hy-Gain .. etc control boxes to work with the Alfaspid Rotor? I love the rotor....But just am not much of a fan of the control box or
Looking for a few pics of how your Tower Foundations were poured with or without the actual tower base. The HDX-589 base seems extremely heavy and would hate for this thing to drop in the concrete as
I'm getting ready to stack a "Christmas Tree" arrangement of Mono Banders on a single mast. Looking for an appropriate distance for separation of the following antennas. All M2'd antennas... 20M5 15M
I'm in need of the two pulley's that are used for the raising fixture cable to attach to on the tower side of an HDX-589. I have the bracket there...but the bolt and two pulleys are missing. I called
I just found the factory installed rotor plates are about 3 feet down in the top section of the HDX 572 and 589. I need to install rotor plates that are about 8-10 feet down. Who sells the additional
I have a new 15M6 from M2'd and one of the boom sections fits EXTREMEMLY tight. I was able to insert the section about half way in and that was it. I needed to use a come-along to extract them. I did
Have two 6M7JHV Yagi's that were used about a month then removed and boxed back up. Been in storage for the past year or so. Boxed and ready to ship... $400 plus shipping for both. Rich N7TR Reno ___
Antennas are sold... Thanks. --Original Message-- From: towertalk-bounces@contesting.com [mailto:towertalk-bounces@contesting.com] On Behalf Of Rich Hallman - N7TR Sent: Friday, June 10, 2005 10:53 A
Is the Andrews LDF4-50B Hardline Direct Burial? Thanks... Rich N7TR _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stat
Just picked up a used MFJ-259B......Shows Version 2.22 when I power on....Are there updates I should look at or is v2.22 the latest? Thanks... Rich N7TR ______________________________________________
I may be looking at this too hard....But what is the best way to install a rotor in an HDX US Tower? I have the Mast and the Antenna in place with the Mast Raising fixture....But not sure how to line
Before I buy the US Towers' Coax Standoffs.....are there other after market versions available? US Tower seems to want a lot of $$, for something that looks kinda basic. Thanks... Rich ______________
Hi Terry... I just finished installing a 350ft run for a M2'd 2800DC. I ran two runs of #12 Burial Romex (250ft roll for $45 at Home Depot) from the house to the tower (About 200 ft each, total of 6
Just about to finish up the final install of a 20M5. I noticed they have 4 different settings for the antenna but only one SWR curve chart in the manual....But doesn't say what setting it was for. An
Looking for users of the M2'd 5 Ele 20 Meter Beam (20M5). Please reply directly... rich@n7tr.com Thanks... Rich N7TR ** ex KI3V, N3AMK, WB3JOV www.n7tr.com telnet://dxc.n7tr.com <telnet://dxc.n7tr.co
Does anyone have the band plug wiring for a 419a bandpass filter? Thanks... Rich N7TR _______________________________________________ See: http://www.mscomputer.com for "Self Supporting Towers", "Wir