Joe I tried in the pass and for some reasons it did'int work. So I got in touch with RB tech & was told that to operate RTTY ((( FSK ))) ( for the RTTY filters & TPF during contests ) I have to use t
I CLOSE THE SUBJECT FOR the moment. I will experiment three different method given on different post Gilles ve2lx == _______________________________________________ WriteLog mailing list WriteLog@con
INFO NEED FROM icom ic-7600 users or other in this groupgoup When I tune the radio on RTTY mode Writelog software closed there is a steady tone eared from the monitor. But if I open Writelog software
After reinstalled the software recently I found that the band plan for Canada is gone naturally. I do not recall at all how to configure it again I erased all default band edge frequencies. To make s
SPAM SPAM SPAM == --Message d'origine-- De : WriteLog [mailto:writelog-bounces@contesting.com] De la part de Sam Lollar Envoyé : 1 avril 2014 13:03 À : writelog@contesting.com Objet : [WriteLog] Fw:
I would appreciate this question been asked to Writelog program writer. Is it feasable to unlock that function ( to transmit a programmed - macro - the cursor must be in the ENTRY FIELD) temporary or
The cycling tone I had on the monitor tone when using Writelog software is settled. I only added COM2_RTS_INIT=1 on the port com 2 which is the one used for transmit for my personal needs. COM2_RTS_I
Since a problem with my last audio card I had to removed it and since then I can't get this sound board mixer control on my computer screen. I tried with the basic audio card on board and with an EAS
I have windows 7. Where is that virtual store ? Gilles ve2lx == --Message d'origine-- De : WriteLog [mailto:writelog-bounces@contesting.com] De la part de Gary AL9A Envoyé : 12 novembre 2014 18:05 À
I had that problem with windows( 7 ) and now with windows ( 10 ). It seems that in certain contests or different mode it does'nt do it. Ex: I created a CW GEBERAL LOG and the problem happend but with
Ron After I sent my answer to the reflector I readed again your answer and as you described non of the mixer where configured and as per your details I made the correction and it is ok now Again than
Hello to all. Best wishes for the coming year 2016. What are the best telnet dx clusters till recently. Gilles ve2lx _______________________________________________ WriteLog mailing list WriteLog@con
I repeat my post to have answers direct to my email Hello to all. Best wishes for the coming year 2016. What are the best telnet clusters for DX till recently. Looking for recent web references that
Telnet dx clusters. Should we choose a cluster close to our area thinking that I use only a limit antenna ( a dipole ) and spotters in my area suggest that those dx stations should be easier to reach
Windows smartscreen refuse and stop installation of the WL V 12 for security protection. Can someone help me Gilles ve2lx Rigel001@sympatico.ca == --Message d'origine-- De : WriteLog [mailto:writelog
Sorry for the help request. I got it. I forgot to use legacy installer Gilles ve2lx == --Message d'origine-- De : G [mailto:rigel001@sympatico.ca] Envoyé : mercredi 13 janvier 2016 12:13 À : 'writelo
With V 10 my INI FILE IS MUCH SHORTER ? I can't find the old INI file with all my pass set up nor I can find the import function that drive me to the ini file ?? Can someone help me Gilles ve2lx@symp
I got it after reading emails & tutotrials Gilles ve2lx --Message d'origine-- De : WriteLog [mailto:writelog-bounces@contesting.com] De la part de G Envoyé : vendredi 22 janvier 2016 11:46 À : writel
In the INI file BANDMAP is entered as STARTEBANDMAP= YES. But each time I open WL it does'nt open automatically ? I have to go at WINDOW / BANDMAP to open it ? Can someone help me ? Gilles ve2lx ve2l
To: Ed Muns My Writelog version is 12.03. And the band map does'nt open automatically Gilles ve2lx == --Message d'origine-- De : Ed Muns [mailto:ed@w0yk.com] Envoyé : lundi 4 avril 2016 19:44 À : 'G'