Results:

References: [ +from:rob.katz@thelegacycenter.com: 7 ]

Total 7 documents matching your query.

1. Re: [TowerTalk] Quick Disconnect Suggestion (score: 1)

Author: Rob Katz <rob.katz@thelegacycenter.com>

Date: Thu, 11 Jun 2009 11:16:28 -0400

I use trailer wiring connectors with good success. I take two of the flat 4-wire connectors and tape them tight together to make 8-wire connectors. They are waterproof and rugged, made to take the ab

/archives//html/Towertalk/2009-06/msg00306.html (9,061 bytes)

2. [TowerTalk] Problem with MFJ 259B - won't measure X (score: 1)

Author: Robert Katz <rob.katz@thelegacycenter.com>

Date: Wed, 09 Jul 2008 22:58:08 -0400

I'm trying to cut some 40m 1/2 wavelength lines of 300 ohm ladder line using my MFJ 259B, and I noticed an odd problem. When adjusting the frequency (the line was shorted at the far end), the reading

/archives//html/Towertalk/2008-07/msg00240.html (7,237 bytes)

3. [TowerTalk] FAA regulations for tower permit (score: 1)

Author: Rob Katz <rob.katz@thelegacycenter.com>

Date: Wed, 18 Jul 2007 17:54:32 -0400

I am in the process of obtaining a permit to put up a 70 foot tower, and I have been requested to "Provide evidence that the tower complies with FAA regulations and does not present a danger to navig

/archives//html/Towertalk/2007-07/msg00710.html (7,775 bytes)

4. [TowerTalk] alternative to concrete stubs for Trylon tower (score: 1)

Author: Rob Katz <rob.katz@thelegacycenter.com>

Date: Thu, 5 Jul 2007 13:02:42 -0400

I have a Trylon 72' tower that I'm installing this summer, and I have the "base foot weldments" (these are feet that bolt to the bottom tower section and then bolt to rod that is sunk in the ground).

/archives//html/Towertalk/2007-07/msg00227.html (7,758 bytes)

5. [TowerTalk] EZNEC model for 40 meter v-yagi (NW3Z/WA3FET) (score: 1)

Author: Robert Katz <rob.katz@thelegacycenter.com>

Date: Tue, 8 Aug 2006 17:47:04 -0400

Hello all, Does anybody have an EZNEC file for the 40 meter beam described in May 1998 QST by NW3Z and WA3FET? This is an interesting design with a full size driven element and wire elements for refl

/archives//html/Towertalk/2006-08/msg00209.html (6,952 bytes)

6. [TowerTalk] Need help stringing a half-sqare over trees (score: 1)

Author: Robert Katz <rob.katz@thelegacycenter.com>

Date: Wed, 20 Jul 2005 14:05:55 -0400

I've managed to place ropes in two tall trees (~75') about 150 feet apart. I want to string a half square on pulleys between these trees, with a horizontal wire between the trees and then a vertical

/archives//html/Towertalk/2005-07/msg00476.html (9,203 bytes)

7. [TowerTalk] Resonant freqs for KT-34XA? (score: 1)

Author: Robert Katz <rob.katz@thelegacycenter.com>

Date: Sun, 2 Jan 2005 12:38:08 -0500

Does anybody have resonance measurements for each element of a KLM KT-34XA? I bought a used one and it doesn't tune up on 15m and 20m. In measuring the resonant frequencies, the front driven element

/archives//html/Towertalk/2005-01/msg00025.html (8,106 bytes)

Current List: 1 - 7
Page: [1]