Recently K4IX in Norfolk, VA became SK. His ham gear estate including an OMNI-6+ which he used daily on CW with the 7020 group is being sold by W3MC and KT4P. Good luck, Roy K6XK/0
About... "BTW, you CAN send CW on these bands... you would just need to have audio keying on a USB transmission... which is supported via some soundcard software like MixW. It certainly meets the let
Asked, "I recently acquired an Omni 6+. I enjoy using a bug for operating around 25wpm. I have noticed that the rig "throws" in extra dits randomly. Very frustrating when I know I'm not making them.
All, FYI, Page 4-28, last paragraph, has several omissions and a potentially damaging mistake. Things are okay up to and including the sentence, "While watching the meter, rotate first the bias pot R
About, "Now I've got my Omni 6 in action again, I'd like to do something to either cure, or alleviate, the clicky/thumpy sidetone which has always been a feature of my Omni 6, from new. Thump/Click p
Hello, Ten-Tec provided me with a free mod. kit which greatly reduced receiver hiss and stopped QRN from degrading receiver S/N ratio, which is also a problem, especially on the low bands (it caused
Concerning: "Except for the JRC's, most imported rigs essentially put all the audio "in phase," so to speak. " I need some help understanding this concept. Can you explain further? Steve Ellington N4
About: "Hi All. I just got a Omni VI and discovered that in CW mode it is receiving lower sideband...etc." I have always preferred listening to CW in LSB (thanks, T-T). Probably because I'm a low ban
Concerning: "Hi folks - The comparisons I see on the reflector re the above radios generally relates to SSB and audio. Does anyone know how the 746PRO and the 756PROII do with cw? I operate 99% cw. T
This has been posted before... Remove knob. Bend inward the drag arms. Glue soft cotton pads to back side of knob. Put some silicone lube on the cotton. Replace knob. Adjust spacing of knob to panel
Yes, There are some. The factory provided me with a free upgrade kit which eliminated a "swishing" sound in the received audio which occured when QRN modulated the AGC. This was especially a problem
About... "Hi all When I move the volume control of my two months old Omni VI Plus, either up or down there are certain points where I get a bad "crushing" noise which is annoying specially while wear
Inquired, "Why does every Jupiter and Pegasus sound like they have a slightly fuzzy sounding cw transmit note? What gives? Has that been addressed yet?" Don / WA9TGT Don, Yes, sadly it's true and has