Not, the job is actually easiest with a steady carrier. 73, Sinisa YT1NT, VE3EA _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/m
Well, it's probably fair to say that both things matter, and one is no substitute for the other. 73, Sinisa YT1NT, VE3EA _______________________________________________ TenTec mailing list TenTec@con
Thanks God, unpleasant truth looses against the pleasant untruth :-) 73, Sinisa YT1NT, VE3EA _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.con
Is the measured curve in blue or in red? 73, Sinisa YT1NT, VE3EA -- YU DX Contest April 15/16, 2006 http://yudx.net 2 x 8 hours of worldwide CW connection . _________________________________________
http://www.yccc.org/Articles/articles.htm Top article: "Common Mode Chokes" by Chuck Counselman, W1HIS A "must read" for anyone dealing with antenna feeding and RF currents in general - i.e. most of
It is the codec clock that matters here, and both codecs use a single crystal; so the problem is elsewhere. 73, Sinisa YT1NT, VE3EA -- YU DX Contest April 15/16, 2006 http://yudx.net 2 x 8 hours of w
On the contrary, the "I hate the Orion" crowd will sell their Orions at much reduced prices, so the rest of us will benefit by buying them out quickly. And if someone from the rest of us happens to f
Believe it or not, the "565 Manual" does not even attempt to define how is the the TX mode established! Therefore it cannot be a software bug, because there is no specification. It's only specified t
Was he able to explain how is the TX mode actually established? The manual does not even attempt to define that. No, it cannot be an operator error because the correct procedure hasn't been defined.
Quoting from page 7: Amplifier linearity check Since you have made the transmitter adjustments at the full power level appropriate for your class of entry, the monitor receiver?s audio has included a
A directional coupler is the standard way (directionality can be neglected for the purpose), and anything that picks up the inner field (loop or a tip within the coax) and not the outer field would d
What is kind of beast you have in mind? "Autocorrelation NR" is such a broad term that it means next to nothing. 73, Sinisa YT1NT, VE3EA _______________________________________________ TenTec mailing
Hi Lee, It's just like that with Orion I. The ALC LED is on the A8 Keypad Board (front panel), driven by the CPU peripheral circuitry, with no direct connection to the RF circutry. The CPU ALC input
Well, deriving it from the complex envelope is equivalent to deriving it from the peaks of the original RF signal. 73, Sinisa YT1NT, VE3EA _______________________________________________ TenTec maili
My Orion Classic was to be the main rig for YT6A WRTC team. Unfortunately, system integration could not have been completed on time, and my FT1000MP MkV had to be used instead, along with Drake R4C a
It seems to me that two different definitions of "elegant code" keep floating around. The one as you stated above, and the other maintaining that an "elegant code" is inherently complex, unreadable a
Just the opposite - IC7800 is more SDR and less hardware based than Orion. That is, Orion performs three frequency conversions before going to DSP, and IC7800 only two. Also, Icom uses twice as many
I do love my Orion deeply and truly, but nevertheless I find the persistence of the "Frequency Stability" hoax unbelievable. It appears now in three places: on the Orion II page, in the manual and on
Can I ask some of Orion II owners to check this? On Orion Classic, frequencies stacked using VFO A disappear after stacking some frequencies using VFO B on the same band. That is, the total number of