At 05:14 PM 4/20/2004 -0500, N4OX@webtv.net wrote: I'm putting together a used A4 with a 40 meter add-on kit for the Florida QSO Party this weekend. Cushcraft assembly instructions are not as clear a
At 07:21 AM 4/21/2004 -0400, Dave Anderson, K4SV wrote: Hi Guys, Does anyone have a suggestion on what type of coax that is low loss from the tower base to the top that is flexable? I plan to run 7/8
At 08:50 PM 4/27/2004 -0500, Lou Laderman wrote: Mention was made of using a different, more flexible coax for rotor loops than used on the main coax lines. I've seen this suggested elsewhere also. I
This is great info, thanks for taking the time to explain it! I've always suspected the "wives's tale" to be untrue, but never had any data to prove it. I'll be archiving this message for future refe
At 01:14 PM 4/28/2004 -0400, Steve Meuse wrote: At 08:50 PM 4/27/2004 -0500, Lou Laderman wrote: Mention was made of using a different, more flexible coax for rotor loops than used on the main coax l
At 12:05 PM 4/29/2004 -0700, Dino Darling wrote: I've said it before...check out CableXperts! They are really doing it right with the right equipment!!! The problem I have with CableXperts is that th
At 10:49 PM 5/9/2004 -0500, Lance Peterson wrote: I'm deploying an antenna on my residential rooftop for 2.4GHz wireless for a community LAN and I was wondering the best way to get 20' high with no g
Hi Folks, looking to see if someone has the cable pinout for the G450 rotor. The manual on Yaesu's webpage is for a newer style than what I have. I have an older version that has just a terminal stri
Rick Karlquist expunged (richard@karlquist.com): Blocking port 25 outbound is a *very* good thing. This prevents subscribers who have trojan spam bots on their machines from spamming the rest of the
wa3afs@inav.net expunged (wa3afs@inav.net): For RG-8X at 150Mhz that's a loss of 9.4db :) According to http://www.timesmicrowave.com/content/pdf/LMRGuide.pdf -Steve N1JFU -Steve _____________________
Matt Patterson expunged (mattpatt@1starnet.com): I don't know the Rohn dimensions, but you may want to check these folks out: http://www.penninger.com/ It looks like they are geared for 2" masting. -