Search String: Display: Description: Sort:

Results:

References: [ +from:sswhite@mchsi.com: 45 ]

Total 45 documents matching your query.

1. [TenTec] OMNI 546 cabinet covering (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Sun Aug 3 23:32:32 2003
Don When you get this figured out and you determine a source for the black covering and a process to take off the old and put on the new I know there will be many interested in what you did and where
/archives//html/TenTec/2003-08/msg00061.html (9,675 bytes)

2. [TenTec] Building VFO's for Omni A-D's (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Sat Aug 9 01:46:33 2003
I have been thinking about converting an old Argosy to use it as an external VFO for an Omni-D that I have. I know that this is akin to making a hammer out of a shovel but the Argosy PA is gone and t
/archives//html/TenTec/2003-08/msg00136.html (7,116 bytes)

3. [TenTec] great RX320 review (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Tue Jun 10 21:07:15 2003
I have always wanted a small QRP module that would go inside my RX-320 case I would think that since the 320 is smiliar to the Pegasus that this would be relatively easy to do. I would guess that you
/archives//html/TenTec/2003-06/msg00376.html (9,554 bytes)

4. [TenTec] great RX320 review (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Tue Jun 10 22:55:35 2003
I would be that your right that the Argo has a better receiver and it is already to go just add Carl's software and an antenna. I am afraid that sometimes I like to do things the harder way to learn
/archives//html/TenTec/2003-06/msg00380.html (9,625 bytes)

5. [TenTec] WTB Argosy Front panel (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Sat Mar 1 10:30:42 2003
I am looking for an Argosy analog or digital front panel, if any of you run across one of these I am most interested since I need to replace mine, it is badly damaged. steve
/archives//html/TenTec/2003-03/msg00009.html (6,252 bytes)

6. [TenTec] DriverTransistor Subsitute for Omni-A???? (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Sat Feb 1 09:24:03 2003
Can anyone tell me what the equivalent is to the PT3647 RF driver in the Omni-A PA? I had been told that there is a NTE equivalent but forgot the number. Is there a standard JEDEC equivalent as well?
/archives//html/TenTec/2003-02/msg00004.html (6,388 bytes)

7. [TenTec] 262M Power Supply Problems (score: 1)
Author: sswhite@mchsi.com (Steve)
Date: Tue Feb 11 13:48:03 2003
I have been fighting a problem in my Omni-A and it is beginning to appear that the power supply is not up to par. It doesn't put out 13.8 volts under load very well... I wonder if anyone would happen
/archives//html/TenTec/2003-02/msg00478.html (6,755 bytes)

8. [TenTec] Looking for a Junk Argosy (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Sun, 5 Jan 2003 14:02:29 -0600
I am looking for a beyond repair Argosy....As long as it has a good case I would be interested but really would rather have it not working since I am only interested in the case and front panel. If a
/archives//html/TenTec/2003-01/msg00070.html (6,491 bytes)

9. [TenTec] Omni-A Display Lights and Dial?? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Mon, 13 Jan 2003 12:18:08 -0600
I have an Omni-A and am wondering if the red vertical bar that indicates the 100Khz marks is supposed to be illuminated. Mine is dark and is hard to see at times and am wondering if I have a lamp bur
/archives//html/TenTec/2003-01/msg00304.html (6,612 bytes)

10. [TenTec] Omni-A low power on 14,21,28 ok on 28.5 and up??? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Mon, 13 Jan 2003 19:03:22 -0600
Boy this is a problem that I have never seen before. My Omni-A has low power out on 14,21 and 28.0 but is ok on 28.5, by low power I mean less than 80 watts out. On 3.5,7.0 and 28.5 I can get 100+ ou
/archives//html/TenTec/2003-01/msg00315.html (6,710 bytes)

11. [TenTec] Help with RFI problem, Thanks to all (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Sun, 8 Dec 2002 11:21:59 -0600
I tried the same trick by changing my refresh to 75 and it helped a lot, I then upped it to 85 and it helped even more and finally I am at 100 hz and all the noise that I was seeing around the 14.070
/archives//html/TenTec/2002-12/msg00185.html (7,833 bytes)

12. [TenTec] BFO Alignment Omni D Freq? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Tue, 10 Dec 2002 16:31:21 -0600
Does any one know the correct freq that the BFO's should be set to when aligning the Omni-D? I have tried the method outlined in the manual and it seems a bit of a difficult way and can lead to some
/archives//html/TenTec/2002-12/msg00262.html (7,475 bytes)

13. [TenTec] BFO Alignment Omni D Freq? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Wed, 11 Dec 2002 06:56:59 -0600
I took a look at the Argosy manual and they both use the same circuitry and the same procedure to align the carrier oscillator. If they got the Argosy one wrong then I have to assume as you did that
/archives//html/TenTec/2002-12/msg00274.html (9,068 bytes)

14. [TenTec] BFO Alignment Omni D Freq? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Wed, 11 Dec 2002 16:26:19 -0600
I have sent an email off to Ten Tec to see what they have to say regarding the proper procedure for setting up the Carrier Oscillator on the Omni-D. When I used the procedure in the manual I had real
/archives//html/TenTec/2002-12/msg00282.html (9,688 bytes)

15. [TenTec] Power Supply 262M Schematic (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Wed, 11 Dec 2002 17:57:49 -0600
Does any one know if there is an adjustment pot inside this power supply that adjusts current limiting? If so can you tell me where it is located...I don't have a manual on my 262M.. Thanks Steve
/archives//html/TenTec/2002-12/msg00287.html (6,421 bytes)

16. [TenTec] BFO Alignment Omni D Freq? (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Wed, 11 Dec 2002 20:05:20 -0600
Hmmm....I recall that they did answer one tech inquiry of mine regarding mods to the Omni-D but just in case they no longer reply I will give them a call in morning...Thanks for the heads up. steve -
/archives//html/TenTec/2002-12/msg00292.html (11,813 bytes)

17. [TenTec] I am looking for a fixer upper too! (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Thu, 1 Aug 2002 15:12:57 -0500
Now that Al has found his fixer upper maybe someone will have a rig that they want to see brought back to life and willing to part with. Cosmetics do not matter or condition, let me know if you have
/archives//html/TenTec/2002-08/msg00003.html (6,885 bytes)

18. [TenTec] I am looking for a fixer upper too! (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Thu, 1 Aug 2002 16:56:04 -0500
Steve That's a good start, I will combine that with the capacitor that I have and then we got something. But seriously, I am looking to bring one back from the dead and I am sure there are few more o
/archives//html/TenTec/2002-08/msg00005.html (8,578 bytes)

19. [TenTec] Paragon vs. Omni V Questions (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Tue, 6 Aug 2002 17:58:33 -0500
I am trying to understand the differences in performance of the Omni V as compared to the Paragon. Setting aside for the moment the differences in the keyboard layouts and the man machine interface w
/archives//html/TenTec/2002-08/msg00109.html (6,953 bytes)

20. [TenTec] I'm in trouble with the PTO rebuild!!! (score: 1)
Author: Steve" <sswhite@mchsi.com (Steve)
Date: Sun, 11 Aug 2002 17:25:48 -0500
Well to make a long story short, I have lost my instructions for PTO rebuild. I have taken these apart before and had purchased a rebuild kit in the past but this one that I am working on now was not
/archives//html/TenTec/2002-08/msg00181.html (6,983 bytes)


This search system is powered by Namazu