Probably. I am checking with the new owner of the WPX contest what he wants to do about this. He will probably have to check with the person who is going to write the software to do the log checking
Does this happen all of the time? It could be that the file you are reading from is corrupted. Are you maybe trying to read and write the same file? You might also try turning off a disk cache if you
I have seen the same thing with my TS850 as a second radio. If it is off, the clock only updates every 2 seconds or so. Normally, not an issue, but it is a small pain when using the auto-cq function.
The Tree is silent in the forest - having pretty much said all there is to say on this subject. However, I can say it all again. Well - I agree with some of the points being made. There is no doubt t
This is really an important point. One of the best things about Cabrillo is the fact that there is ONE place to go to find out what the format should be. If someone says they have a Cabrillo log for
A good question. First - there is the obvious timing issue... .DAT was first and .CBR came later. Rewriting TR to deal with .CBR instead of .DAT would be a lot of work. And then, there are those cont
True - for those contests that are using Cabrillo (not all do). Well - maybe. The .DOM files do two things: 1. Identify multipliers. 2. "Filter" the domestic QTHs as shown in the log so they conform
Here is the answer to Arturo's question: From: "merchant@garlic.com" <merchant@garlic.com> To: tree@kkn.net Subject: RE: [lu6etb@cvtci.com.ar: [Trlog] WPX Multi-Single numbering] Date: Thu, 25 Mar 20