I have had read somewhere on this reflector that in order to damp element vibration in the wind you have to insert rope inside the elements. I am just about to install my Mosley TA36 with 40M kit and
I think I goofed somewhere with control cables (too many connectors and too many splices) to the rotor and the rotor is rotaiting the other way. When I press CW it rotate CCW. It is like CW and CCW a
Hi Is anyone know how is the feed line (coax) connected to driven element of Mosley TA36? Is it through the 1:1 balun or directly to the elements? 73 de Andy - VA3PL
There is a product called BRAID SLEEVING EXPANDABLE Made by Alpha wire, www.alphawire.com This think is shown on page 153 og their recent catalog on line. The staff looks like coax shielding but it i
I am just about (this coming weekend) pour my concrete base for TX455 tower. Foundation for it is going to be 4 X 4 X 6 deep. I'll be using a mixer to make the concrete (cement). Can anybody tell me
Anybody knows what the proper diameter is and length of the foundation bolts (J bolts) for TX455 crank up tower? Length of J section would also help but I think it is not important as much as lengths
Just wandering how long (in hours perhaps) it will take to dig 4 X 4 X 6 feet deep hole in medium to heavy clay using just hand tools like a shovel and stuff by one person. I am looking for ball park
Try this: Take an aspirin tablet. Lay the wire flat on aspirin tablet and then use hot soldering iron with a dab of solder on it then pull wire slowly out of between the aspirin and soldering iron. T
Why do I receive all the time double postings....not only on this reflector but on others also. Is it something wrong on my side? Perhaps something wrong with my configuration here? Andy - VA3PL
I become happy owner of TX455 crank up tower. I began planning the rebar cage. My questions is: Can vertical rebar members be driven let say 2 feet deep to the ground at the bottom of the hole or thi
Perhaps some of you fellow Canadians would remember the Canadian regulation as far as importing Amateur radio related goods from the USA. Do I have to pay duty and taxes on it or not? Where I can fin
Date: Thu, 15 Aug 2002 22:36:39 -0400 (Eastern Daylight Time)
=0D I been hoping to get this special tariff code so I can show it to my brok= er.=0D Andy=0D =0D =0D --Original Message--=0D =0D From: K7LXC@aol.com=0D To: <towertalk@contesting.com> Date: Thursday,
Date: Wed, 12 Jun 2002 17:24:59 -0700 (Pacific Daylight Time)
Anyone out there has plans for rebar cage and/or perhaps ready made plans for foundation for TX455 crank up tower?=0D =0D Andy - VA3PL -- StripMime Report -- processed MIME parts -- multipart/related
Anyone took the Alinco Switching Power Supply (I think it is 330 model number) to Europe? Is it going to work there? Is it sensing the 220V there? Do you have to change anything inside? Is it working
I am trying to buy the tower from Dennis John Gazak N3DG down in near Philadelphia. The problem I have is that I can't go there myself and inspect the tower because it is 12 hours drive from here. I