Hi John, In my computer that I use for my radio station I have two SoundBlaster cards. The original that came with the clone is the SB Live (value) and now a second sound card being the SB 16 PCI. My
Hello Bill, No second systray icon here. The Windows controls for the second card is simply accessed by double clicking the systray icon and then going to Options and Properties. In the drop down box
Hi Chris, At the moment I have v10.37B running and it does have a drop down selection for my IC756Pro. I did have problems with the automatic settings with a one programme. I have found it is best to
Hi Gang, =20 Is there a proper or formal way to 'end a contest' using WriteLog? =20 In reading through as many of the achieve I could handle in one evening, = I have deduced that the Cabrillo checkin
Hi Bill. My qualifications as you, am not a big gamer in contests, - but do enjoy them when I do. The first thought I had is for the guys using old paper machines (Yeh.. Right!). It was always good e
Thanks Richard, I wholeheartedly agree with your comments. I to find WriteLog is a great program, as are the fellow ops on this reflector. As a relatively newcomer and casual contester I have lots to
I did have a similar problem with 10 meters knocking my rig interface off-line when the beam was pointed in certain directions. As you already suspect, ferrite beads will help, but also in my case I
Gang, When I try to use my PK-232 DSP to send CW with WL's ALT-K, it will not send the entire line. My CW stops sending and might send a few more characters or if I press the space bar. I also suspec
Only a type-o in the web address from Al. I bet he has it corrected before I can get this message typed? Please try: www.cssincorp.com - that will take you to the company site. For the actual LogWind
Is it a possible oversight in the CQ/RJ WW RTTY DX Rules? Should the rules not indicate Canadian Post Office abbreviations? i.e.: VE1 = NB and NS, VE2 = PQ, VE3 = ON ........... Etc... I think the Ca
I had a similar problem here, but NOT using MMTTY. My set-up uses the built-in Rttyrite program with a PSK232/DSP terminal unit. I found a work-around by simply pressing ALT-K and then followed by Es
I have been experimenting with the HF GRID Location module, but for some reason it gives me the red out of band "B" and will not score. If there are other shortcomings I have not found them yet. Is t