Hello, I would first like to introduce myself, name is Marc Tessier callsign is VE3TES, I have been licensed since 1991 and active on HF since day 1. Now that, that's out of the way, I would like to
Firstly I want to thank all that took time out to reply to my quest for knowledge. Now I would like to pick your brains one more time if I may... Is it possible to build a vertical for the WARC bands
If you have such a beast for sale or know of one, please don't hesitate to reply to my email address... Thanking in advance.. Marc Tessier - VE3TES _______________________________________________ ___
Hello; After a few failed attempts I am still in the hunt for one of these HF vertical antennas, Please take note I am in Ontario Canada and would need cost to ship to me included in the price... Mar
Hello once again Group, I have recently acquired a used Cushcraft R7 10-40M vertical for HF, Only one trap is confusing me and that is the trap for 15M , it is the only trap that does not show well o
Hello once again group, This time I write to you in hopes that someone out there has a Cushcraft R7 apart and or down on the ground. Reason I am hoping for this is simple, I recently purchased a used
Hello, It would appear that an easier way of doing things was to post a link to the picture I drew up showing the required measurements, and I have done just that, here is the link to the picture I d
Thanks to all especially Dave K1HT, who took so much time to provide me with detailed measurements of all the traps on the Cushcraft R7 I bought from a fellow on this reflector, without Dave's help I
I have decided to put a small web page together with the data I have collected of my Cushcraft R7. This is my first attempt at such a task, so please be nice... hi hi But open to any and all suggesti
I just added a bunch of photos of the completed and rebuilt traps to my page. Hope all enjoy !!! http://home.cogeco.ca/~ve3tes Regards, Marc Tessier - VE3TES _________________________________________
What is the best method to determine what trap is what for the Cushcraft ATB-34, the traps have no metal tubes over them like the current model A4S has, I have a GDO and would like to be certain I ha
Hello all, Firstly I want to say a BIG thank you to all that helped me in my endeavors to finally get my R7 back into operating state. I have updated my web page with photos and a bit of info regardi
Well now that my R7 project is complete I am toying with an idea for a 6 meter beam, thinking of using a quad reflector and a folded dipole for the driver with perhaps one or 2 directors, has anyone
Hello what I did was remove the shrink tubing all together and reinstalled newer stuff, the type I was able to get my mitts on had a similar sealant like the original tubing had. The manufacturer nam
Hello gang, just thought I might try and post this question here in hopes that someone out there has done similar. My buddy just bought his first house, he will be putting up 2 X 56 foot Delhi towers
Hello I am looking for some info if possible, I am building a rotor control box for a light duty rotor I have here , and I am basing my design on a Ham 2 Series of Rotor made By CDE. The questions I
As the topic states, I am looking for a used or new Rotor Indicator Meter, By this I mean the meter that shows the operator of the rotor which direction the antenna is pointed. Meter can be from eith
Hello folks, I finally bit the bullet and bought myself an Icom 706MkIIG, and will be dipping my feet back into 6M once again. I still have my old 5 element Cushcraft Yagi for the band, and would lik
Hello, Firstly allow me to say what a great group of guys and Gals, we have here in the forum, all the wealth of knowledge and wisdom I have picked up by such a breed of fine individuals should help
Hello again group, first thanks to all that helped me out with my yagi spacing issue, got that all figured out, now I am thinking my 2m yagi which I built sometime ago could stand some updates in the