There's a chip one can use in a rotary encoder application that uses a magnet . The chip senses the magnetic field as the magnet rotates. I'm wondering if an RIT could be built using a electro-magnet
I must be misunderstanding.. My C21 hears both sidebands all the time. Its advantage over direct conversion is freedom from hum and images (wrong sideband). __________________________________________
I tend to think it is more than the antenna. In my Omni, if the drive is high I get an ALC light. Are you seeing that with drive set high? Sent from BlueMail _______________________________________
I don't disbelieve what you are saying... but I wonder if you've got a bad solder joint or other kind of physical crack somewhere, some capacitor has more or less capacitance depending on the temp ex
I had a good day at the Jacksonville, Mississippi hamfest today. I acquired a box containing two Argonaut 509 rigs and some accessories from an SK estate. Is there any secret lore about Argonaut 509
I'm working on the alignment of an Aragonaut 509. I'm looking at the manual, page 3-10 which talks about the 80233 Oscillator board. The section labeled "Multipler Tuning", I am having a hard time tr
I received some help from off-list emails. Here is what I did: I set the bandswitch to 10 meters and the tuning to the low end of the dial. Using an external receiver, I found the oscillator signal a
My next need for this Aragonaut 509 is tuning one of the TX output filters. The manual says not to touch them. Ok! I'm for that, except someone has already been there and my 7 MHz filter is blocking
80262 - Front End It has RX filters and TX bandpass filters In my copy of the manual it is covered on pages 3-7 and 3-8 Chris The TX low pass board, 80260, shares one variable cap on all bands and th
I brought home a box of Ten-Tec Argonauts and accessories from the Jackson, MS hamfest. I have the first one in reasonable working condition. Now I am looking at the 2nd. The first job was to rebuild
How is the noise level with a 50 ohm dummy load? Sent from BlueMail _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listi
I have a TT Delta along with a Pyramid power supply set up to turn on the Delta with one switch. I've decided that the Delta is not for me and it is for sale. I am located in Dubuque, Iowa and can de