I am trying to use my computer's sound card for SSB message recording with Writelog and I it is not working well. When using my Heil headset with the HC-4 element, the audio is extremely low. I have
I always remove the Country and C entries from the Entry window. To remove them: 1. From the WL main screen go to Contest/Exchange Format Setup 2. Highlight Country and unselect Prompt checkmark. 3.
CwSendPartialCallCorrections=0 Now when you hit the + key the entire corrected call is sent, the call is logged, and the contents of F3 are sent. If you made CwSendPartialCallCorrections=1 Then only
Check for a backup ADI file in the directory you were saving your log. You should be able to recover by using that file. Good Luck. Hi Wayne; I lost all my log data during the CW WPX test this weeken
Select Contest/Exchange Format Setup Then pick the entry on the left you want to delete, such as RST, and unselect the Prompt check box. Then Save. You can do the same for C and Country if you wish.
The proper designator according to the rules is NS. VO1HP and VO1MP were sending NF which returns a ? in the mult column. Does anyone know how to fix this?
Yep..my mistake. I just matched up the multipliers off of the NCJ web site and one is missing. Guys, VO1 is Newfoundland, encoded NF. Nova Scotia is VE1, encoded NS A new version of the namedmul.ini
I personally can't stand cut numbers. 5NN is ok, but the serial number should be spelled out. The Europeans love to send ANT for 190. Very confusing - especially at 40 WPM. There's probably other cut
In writelog.ini try adding the following line under [PORTS] CW_ON_PIN1=1 Hi friends! I installed WriteLog on my new notebook under Windows XP home edition. In order to key my transceiver in CW thru t
Make sure under Setup/ports that you select LPT2 for DVK (or the proper LPT port for your DVK.) F3-F6 will be the keys that you will use. Shift-F3 will start the record. --Original Message-- It's not
In Writelog.ini add the following line under the [Ports] section: CW_ON_PIN1=1 I'm having problems getting WriteLog 10.30B to send CW without truncating 1 out of 3-5 dits or dahs. My PC configuration
Make sure you select File/Export/Cabrillo. Then open the file and make sure the Category is one of the following: CATEGORY: SINGLE-OP ALL QRP CATEGORY: SINGLE-OP ALL LOW CATEGORY: SINGLE-OP ALL HIGH
I agree. I saw slowdowns using Win 98 during my major effort during SS phone & CW. I do not notice it during small contests that I participate in part-time. I don't want to go to XP since I need LPT
There is a patch to fix the LPT CW control on www.writelog.com. It will fix your problem. Hi All, Can anyone give me a summary technical description of what happened to the LPT control lines with 10.
Just woke up and decided to play CQ 160 CW, updated to 10.30 the other day but first time to play with. As I have seen as "choppy cw" previously on this reflector, I am another victim of CW keying pr
Run the setup program. If the program asks for a registration key and your's no longer works, you will need to pay a maintenance fee. Write to k5dj@writelog.com for upgrade pricing. I downloaded wl10
There is a patch on www.writelog.com. It talks about the differnet way the LPT port is handled in 10.30. That is you problem. Install the patch and you'll be fine. Just woke up and decided to play CQ
In Writelog.ini under [Configurations] enter CwSendPartialCallCorrections=0 For the B4 stuff, look under the help file Special Message Accelerator Keys... %C %BB4 W5XD%BNR% B W5XD 71 STX Sends other