Don, If you are trying to talk to your OMNI VII from your local computer try using the IP address such as 192.168,1,??. Don _______________________________________________ TenTec mailing list TenTec@
Try DX4WIN Don W4TO _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
Hi Tom, Yes, they will be happy to take you on a tour, and they also have a store. 73 Don...W4TO _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists
Lee, The model 610 USB Keyer/Audio Interface is now being shipped. I have one and it is in operation. _______________________________________________ TenTec mailing list TenTec@contesting.com http://
The Model 610 is a USB device that connects to a USB port on your remote PC that will provide for the connection of a CW Paddle, remote tuning knob. Don ______________________________________________
Art, I was also skeptical about the 715. Now I have one and it works great with both the Orion II and the Omni VII. I operate both rig remote and use the 715 at the client location over the internet.
Dave, I would like to try the program and see the pictures of the mod to the Orion. I have a Orion II. Don...W4TO _______________________________________________ TenTec mailing list TenTec@contesting
Dale, I have a TS480sat I purchased from a friend of mine who used it for a year or so. I had plans for it but never followed through. I have decided to sell it if you are interested. I am asking 450
The answer to your question is yes...I operate a Ten Tec Orion II remotely. I have been doing this for seven years. You can go to QRZ.COM and see the setup. If you are interested I will be happy to s
I have replaced the battery in my Orion II. I have done a RAM clear and Master Reset. When I turn the radio on all is ok except for the sub receiver. It will not recognize the sub receiver. Any idea
Barry, Thanks for your reply. I was very careful not to disturb any of the cables when replacing the battery. When it ask if there was a sub receiver I answered yes. When it came up again it indicate
Billy, Thanks for the response. I will give that a try. Don Don, Do you have the optional RX-366 Sub receiver installed? (Not the factory standard sub-RX) That setup question is only for IF you have
Billy, Thanks to all who replied to my call for help. Great place for old guy that doesn't think like he use too. You were right Billy. When I did the RAM clear it ask me if I had a RX366. I was thin
Ten Tec can fix you up with a battery. Don...W4TO The national chain "Batteries Plus" should have what you need. Even a Walgreen or CVS drug store has many batteries these days. -Stuart Rohre K5KVH _
YES! The current Tentec temporary website indicates they may be repairing Tentec equipment. Is this so? I have an Omni 6+ that needs to visit their repair shop for some receiver work.....If repair se