installations I've found a common problem. When using a piece of plywood as the template for holding the bolts during the concrete pour, I've found that people have nudged the bolts slightly out of
Rich, Without arguing, I'm most sure the deflection was caused by 'nudging. It's most visible as being nudge inwards. As try as you may, you can not dump concrete into the hole without moving the bol
I said I would find out about the LARGE diameter L Bolts I saw them using for the light poles. I asked the crew installing the traffic signals and street lighting poles on the road project near my ho
Don't ask me how I forgot to lay the pvc pipe down before they poured my patio but I did. So..to get some radials from the base of my tower took a little doing. I used a horizontal water drill. A len
You may find what you want at a concrete block manufacturer. The U shaped block is called a 'Beam Block' and is used in an inverted position over the steel lintels placed over door/window frames. The
Ok Guys, Now I need your help. My crank up tower is next to the gable wall of my house. I ran a 14ga solid wire up the side of the tower to a standoff, through a insulator and then horizontally above
Subsequent to my previous post. I just for grins hooked a piece of coax to the inverted L with the braid going to the ground that all (don't laugh, 4 radials) is attached to. I'm seeing 1801 1.2 to 1
As a retired Mason Contractor I may be able to help. What you want to rent, is a Large Hammer Drill. Available at most rental places, Home Depot rentals have them. You get a drill with a SDS bit, tha
There is a reflector available for discussion about Sommer Antennas. http://mailman.qth.net/ Click on the above URL, Click on the title Directory of Lists @ QTH.net Scroll down to the SommerAntennas
If your talking about OZZIE OSBOURNE, what ever he's speaking bared no resemblance to English in any form. :=) http://www.mscomputer.com additional 5 percent off
I was just given 40 feet of tower, 2 meter yagi, a 3el tribander with two traps on each element, and older rotor. Is there a site that shows each brand of tower so I can determine what kind it is? It
Ok, strange coincidence. They are doing a massive repaving, new sidewalks, and NEW STREET lights near me. On the trailer of the streetlight contractor where dozens of approx. 36" long, large diameter
I'm forwarding this for my friend Adrian. It's a little tough getting parts or manuals in Romania. YO3APJ 's email address is adisin@sdb.ro Dear Friends, Maybe I am out of this reflector's subject bu
This idea sounds like fun.... I have one of those monster super soaker guns. I use it on my grandkids. And as far as I'm concerned, pigeons are not animals. They are a cross between Democrats and al
argument - are you saying that the small coil of 1/2" copper tubing hanging in my garage would be a better grounding conductor that my heavy gauge solid wire.? (I can never remember if the soft copp
I've bookmarked that site. Now my question is, what are the proper application for the different types of bolts? Which are stronger? Which are less prone to fatigue? etc. I'm assuming that there are