Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Thu, 13 Mar 2014 12:42:26 -0400
All, To add some explanations/advice to my A9 Power Board 'repair/upgrade' thought process and reasoning, here is a sequence of postings I made before and during and after I made the changes, using n
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Thu, 10 Jul 2014 11:04:07 -0400
Barry, I use HRD 'Classic/Free/V5' and VSPManager to successfully interface NaP3 to my 565 and N1MM. HRD drives the 565 CAT, uses a DDE interface into NaP3, and provides a 'virtual kenwood interface'
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Thu, 27 Nov 2014 14:59:03 -0500
Jupiter and original Argonaut owners, Don't know how many of you use the N1MM logging program with your Jupiter and/or original Argonaut..... but the N1MM Plus development team need some contesters u
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Fri, 03 Apr 2015 14:38:05 -0400
It may just a case of wanting the merged company to be governed under only the Business laws of Colorado. Maybe they get a state tax break 'hand-out'. Ben - WB2RHM MIME-Version: 1.0 To: Ten-Tec-Omni-
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Thu, 23 Apr 2015 11:06:51 -0400
Jim, The original Ten-Tec Invoice had a description of my purchase. And on it, was the S/N of my transceiver and all the 'options'. While you probably don't have the original Invoice, I would guess t
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Fri, 13 Nov 2015 11:04:03 -0500
Please read: http://www.tentecwiki.org/doku.php?id=565pwrdistfail Look down the page to my posting of May 14, 2013. It has a list of values and part numbers for VERY LOW ESR electrolytic replacement
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Mon, 08 Aug 2016 12:49:46 -0400
Gunner, An "old trick" to clear out holes in PC boards that are clogged with solder: Use a round wooden 'tooth pick'. Push it through the hole from one side, while heating the solder from the opposit
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Sat, 05 Nov 2016 12:36:44 -0400
FYI- From a 2009 posting to another group: The thing that disturbs me the most about the DC connector problem, (and before I looked into it, I had replaced the 'stock' parts 4 times), is that for yea
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Mon, 02 Jan 2017 12:37:18 -0500
From the 2005 Version Update of the Orion 565 Manual, in the "Buttons" setup and definition Section: (Note- This works with EITHER of the two receivers, only one is required, and they may be separate
Author: Ben Antanaitis - WB2RHM <wb2rhm@wb2rhm.com>
Date: Thu, 27 Dec 2018 13:33:35 -0500
If this helps, these are the old 'Molex' connectors used for the Band Data in the Orion 565. Molex is now Tyco ( TE ) https://www.digikey.com/products/en?keywords=16405230 Ben - WB2RHM ______________