To cut your 72 degree line using an analyzer, convert it to a freq where it's a 1/4 wave. For 7 mhz, a 72 deg line would be a 1/4 wave or 90 degree line at 8.75 mhz. easier to measure this way. Frank
Anyone know the value of the motor cap for the HD-73 control? And is it non polarized? I also thought they were but the one that needs replaced is polarized __________________________________________
In the middle of SS this afternoon, started to get very high swr on transmit, although receive signals seemed fine, after trying different jumpers, etc, isolated it to the Bencher low pass filter....
I know from some recent sales myself, after being way from ebay for 6 months or so, you HAVE to list Paypal as an option, and YOU CANT list CASH anymore..... _________________________________________
Looking to phase two multiband verticals, probably Butternut HF6, for 40m, using 1/4 wave spacing and either phasing lines or a hybrid. Looking for suggestions on how to switch them so I could contin
...... I've been waiting longer than that...... _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://
S video from a satellite dish, I had the same problem with my neighbor....if he unplugged the S video cable from the satellite recevier, noise went away....reconnected S9 noise, with the peak around
got mine also...not only was it free, they sent it priority mail !!!! On Mon 11/23/09 1:20 PM , "Michael Ryan" mryan001@tampabay.rr.com sent: My new Rohn Catalog arrived today...all 16 pages. - Mike
the insert on the one I got states it's the 25G buying guide, but it's really the whole 240 page catalog...20/25/45/55/65/80/90, self supporting, the whole she-bang.... ______________________________
everyone will be reporting their Morning Bowel Movements. Don't you have a delete key? Your sarcastic comment is inappropriate. Apparently you don't have anything useful to do yourself. The Rohn cata
Need to reattach a rotor cable, would like to do it without pulling the mast and rotor off the plate, but I can't see which screw is terminal 1....can anyone supply the info? ________________________
Dx Engineering sells one, but a little pricey....there was another source of them, quite a but cheaper, but I cant remember the name..... On Fri 02/26/10 10:38 AM , Charles Coldwell coldwell@gmail.co
speaking of batteries, anyone else remember the Battery of the Month club? took your card in, they would punch it, and you got a free battery.... _______________________________________________ _____
It appears as though the Amerite series of tower is a Rohn clone...AME20, AME25, AME45, AME55, etc...the drawings appear identical....anyone have any experience mounting an Amerite piece to a Rohn pi
it's not on the website....what do you need? I think I have a copy.... _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk
steel welded Hazer. From what I have read, if you do not want to do any climbing with the Hazer above you, the tower will be temporarily self supporting because you need to drop a couple of guys unti
Planning on phasing (christman method) 2 verticals for 40m, one a Butternut HF6 and the other either another HF6 or a 40m vertical. I'd like to be able to use the HF6 as a multiband antenna for a sec
the ones marked 1050 are Astroplate....harder to solder...takes more heat....also watch out for the 83-1SP-15RFX, those have a nickle based finish and are almost impossible to solder.....be aware of
Looking for something that will travel easy via commercial airlines and give us a second ant (first one beam) for the high bands....or will a simple fan dipole work as well? _________________________