1. Question - how do I delete entries from the "Recently used" dialog box that first appears when you start WriteLog? I moved some things around on my disk and the entries shown are no longer valid.
Some suggestions. 1. I created a Cabrillo file (Contest --> Cabrillo File...) and filled in all the information in the dialog box (name, address, etc.). The next time I called this dialog box up it r
I use the Andale Mono dotted font. Just because I found it first way before I found this WA6AXE web page with six slashed-zero fonts. http://www.qsl.net/wa6axe/fonts.html - Marc, W6ZZZ - CU in the C
Has anyone gotten the combination of WriteLog, the W1GEE computer/radio serial keying module and an ICOM-756pro to work for keying CW? I have rig control on COM5, the W1GEE interface on COM3 plugged
Got my answer from Eric K6EP. Put some big ferrites on my rig control line, straight key line and ACC1 line. It now works! I have never had a single RFI problem here running 100 watts with SSB and RT
Are you troubled by the pesky MMTTY tuning window always being on top? -- Use CONTROL_ON_TOP=1 to make the CW, RTTY, PSK control dialogs stay always on top, or 0 to make allow them to be covered by t
Oops, I'm wrong. Works with the WriteLog control dialogs but not MMTTY control dialog. _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.cont
Go to "Entry" --> "Timed CQ..." You can read them from any existing file. Go to "Setup" --> "CW/RTTY/SSB Messages..." and click on the Browse button. Find the file you want and Open it. Another hand
it. "File" --> "Save" AND "Setup" --> "Save Configuration" After making a configuration change I use both just to be safe. When changing the "CW/RTTY/SSB Messages" the "File" --> "Save" will save th
haven't is You can read all about it in the February 2004 issue of the NCCC JUG newsletter. Our "New RTTY Enthusiast" Ed W0YK has it set up to do *multiple* MMTTY decode windows from a single sound
Folks say my CW transmit is 160 Hz high when I use the WriteLog CW Receiver and tune in a signal exactly and then transmit. IC-756pro transceiver. Is it a WriteLog setting? An IC-756pro setting? The
and The answer is: Align WriteLog Rttyrite with your transceiver's side tone. Since the IC-756pro is at 600 Hz with the CW pitch knob in the middle I added the following lines to WriteLog.ini: [Rttyr
You can use the Writelog.ini file to permanently set your address and club name for all your Cabrillo log submittals. [Report] Call=W6ZZZ name=J. Marcus Ziegler adrline1=24601 Highland Way adrline2=L
Twice so far the second time I work a station on a new band WriteLog truncates the RCVD to 4 characters. And if I double click on the QSO and enter 5 characters it only displays the first 4. Obviousl