- 1. [AMPS] Grid block keying of SB200 for QSK??? (score: 1)
- Author: wb4mnf@atl.org (Bob Duckworth)
- Date: Mon, 5 Feb 2001 08:31:52 -0500
- Has anyone tried grid block keying of SB200? No manual and wanted to ask a couple of questions before pulling it out of the cabinet. I have a Heath HW-16. This is a low power transmitter and receiver
- /archives//html/Amps/2001-02/msg00110.html (7,727 bytes)
- 2. [AMPS] Grid block keying of SB200 for QSK??? (score: 1)
- Author: wb4mnf@atl.org (Bob Duckworth)
- Date: Mon, 5 Feb 2001 09:00:21 -0500
- Thinking about this a bit more, What if I just unground the 2 x T-160L grids to key. I have a few spare 500V MOSFETs. -- From: Bob Duckworth <wb4mnf@atl.org> To: amps <amps@contesting.com> To: <amps@
- /archives//html/Amps/2001-02/msg00112.html (8,447 bytes)
- 3. [AMPS] Grid block keying of SB200 for QSK??? (score: 1)
- Author: rakefet@rakefet.com (Vic Rosenthal)
- Date: Mon, 05 Feb 2001 08:00:19 -0800
- Look at the QSK circuit on Rich Measures' web site, http://www.vcnet.com/measures/ It includes an 'Electronic Cathode Bias Switch' which cuts off the tubes on ket up. I've used this circuit successfu
- /archives//html/Amps/2001-02/msg00118.html (7,357 bytes)
- 4. [AMPS] Grid block keying of SB200 for QSK??? (score: 1)
- Author: wb4mnf@atl.org (Bob Duckworth)
- Date: Tue, 6 Feb 2001 09:08:05 -0500
- Thanks for suggesitons. and Thanks BAMA! It sure helps to have a schematic. SB200 has grids at RF ground and cuts tubes off with a neg bias to grids. I'm going to nip the wire, lock the relays down a
- /archives//html/Amps/2001-02/msg00130.html (7,359 bytes)
This search system is powered by
Namazu