- 1. [AMPS] SB-230 re-tube? (score: 1)
- Author: bcrowell@excite.com (bcrowell@excite.com)
- Date: Mon, 13 Dec 1999 19:25:05 PST
- Did this reflector ever have a thread on re-tubing the SB-230? Bill Crowell, N6AYJ ________________________________________________________________ Get FREE voicemail, fax and email at http://voicema
- /archives//html/Amps/1999-12/msg00143.html (7,277 bytes)
- 2. [AMPS] SB-230 re-tube? (score: 1)
- Author: k7fm@teleport.com (Lamb)
- Date: Mon, 13 Dec 1999 20:03:20 -0800
- Best to pull old tube out before putting new one in. Be sure to pull plug, also. Seriously, the effort you put in to replace the tube with an air cooled tube could be put into finding a used replacem
- /archives//html/Amps/1999-12/msg00144.html (7,548 bytes)
- 3. [AMPS] SB-230 re-tube? (score: 1)
- Author: W6NQ" <w6nq@rfparts.com (W6NQ)
- Date: Mon, 13 Dec 1999 20:29:54 -0800
- You might also want to look into another version of the 8873, which is the 8874/3CX400A7 triode. It uses the same socket as the 8873. No screen supply required. Modification for air from the bottom i
- /archives//html/Amps/1999-12/msg00145.html (7,897 bytes)
- 4. [AMPS] SB-230 re-tube? (score: 1)
- Author: Ku7i@worldnet.att.net (Lane Zeitler)
- Date: Mon, 13 Dec 1999 20:04:50 -0800
- If W6NQ is correct and the 8874 uses the same socket as the 8873 then the 3CX800 will fit also since it uses the same socket as the 8874. just another option for a nice little amp. lane Ku7i -- Origi
- /archives//html/Amps/1999-12/msg00149.html (8,981 bytes)
- 5. [AMPS] SB-230 re-tube? (score: 1)
- Author: measures@vcnet.com (measures)
- Date: Tue, 14 Dec 1999 06:03:00 -0700
- ? However, for multi-tube installation, the socket spacing with 3cx800A7s must be a bit wider than with 8874s in order to accomodate the 3cx800A7's wider anode cooler. - Rich..., 805.386.3734, www.v
- /archives//html/Amps/1999-12/msg00152.html (9,829 bytes)
This search system is powered by
Namazu