Looking online it would appear that Mouser and Digi-Key no longer have 47ohm 2W carbon comp resistors for making parisitics. They are listed in the catalog but show up as non-stocked or obsolete on t
I have perfectly good suppressors removed from Sb-200 and Sb-220 amps for $4.00 each. Lou **Need a job? Find an employment agency near you. (http://yellowpages.aol.com/search?query=employment_agencie
I just need a bare resistor as I would have to remove the coil from those and then redo it for one wide spaced turn. 73, Scott I have perfectly good suppressors removed from Sb-200 and Sb-220 amps fo
What kind of suppressor are you making with one wide spaced turn? For what amp, band? **Need a job? Find an employment agency near you. (http://yellowpages.aol.com/search?query=employment_agencies&nc
Homebrew amp, 6m only. Following the YU1AW design online along with a few others who built one. Scott What kind of suppressor are you making with one wide spaced turn? For what amp, band? -- Need a j
It's the GI-7B for the tube, and all the designs online, both his and others, show a 47 ohm resistor with one evenly spaced turn on it. 73, Scott What tube are you using? -- Need a job? Find an emplo
You don't need carbon comp- use a pair of 100 ohm 5w Metal Oxide, Mouser PN 286-100-RC. Make the strap from the tube anode to the plate choke as one piece, make a "U" just big enough to fit 2 resisto
Great advice. Carbon comp. would be my last choice for R-Supp. in a parasitic choke. (((73))) Phil, K5PC _______________________________________________ Amps mailing list Amps@contesting.com http://
They ain't made no more so any you do find are going to be old stock. Ceramic composition are what I have been using as replacements. Ohmite type OY specifically part number 588-OY-47-E. $1.20 at Mou
I think that's what I am going to do also, have to raid the junk boxes and see what I have. 73, Scott -- _______________________________________________ Amps mailing list Amps@contesting.com http://l
Guys: I happen to have a bunch of NOS 51 ohm 5% Bradley 2 watt comp resistors. If these would work for you, get with me off list and we will work something out.