- 1. [Amps] 60 filament noise (score: 1)
- Author: StephenTetorka@cs.com
- Date: Mon, 6 Feb 2006 10:36:03 EST
- Hi all: Might it be possible to apply a high-pass filter to eliminate the 60 Hertz ac power supply noise from getting into my filaments? Also..it is my understand that using a DC filament voltage wor
- /archives//html/Amps/2006-02/msg00128.html (6,643 bytes)
- 2. Re: [Amps] 60 filament noise (score: 1)
- Author: R.Measures <r@somis.org>
- Date: Mon, 6 Feb 2006 09:41:49 -0800
- For heater-type cathodes or filament-type cathodes? Richard L. Measures, AG6K, 805.386.3734. www.somis.org _______________________________________________ Amps mailing list Amps@contesting.com http:/
- /archives//html/Amps/2006-02/msg00132.html (7,267 bytes)
- 3. Re: [Amps] 60 filament noise (score: 1)
- Author: StephenTetorka@cs.com
- Date: Mon, 06 Feb 2006 13:18:08 -0500
- Hi Rich: Please excuse me for not providing more detail. I made a 1929 Hartley using a 204A Heising modulated with an 849. Both tubes are filament heated with 11 VAC @ 5 amps wiht center tap on 204 f
- /archives//html/Amps/2006-02/msg00135.html (8,159 bytes)
- 4. Re: [Amps] 60 filament noise (score: 1)
- Author: R.Measures <r@somis.org>
- Date: Mon, 6 Feb 2006 12:46:13 -0800
- DC is okay for heater-type tubes, but for filament types, it is problematic. Richard L. Measures, AG6K, 805.386.3734. www.somis.org _______________________________________________ Amps mailing list A
- /archives//html/Amps/2006-02/msg00138.html (8,793 bytes)
- 5. Re: [Amps] 60 filament noise (score: 1)
- Author: StephenTetorka@cs.com
- Date: Mon, 06 Feb 2006 16:22:37 -0500
- Simple question: regarding my "audio having hummmm" and my 204A is being Heising modulated with an 839...presuming this hum is AC..and this AC is associated with the tube(s) filaments... How is the 6
- /archives//html/Amps/2006-02/msg00139.html (9,894 bytes)
- 6. Re: [Amps] 60 filament noise (score: 1)
- Author: Bill Fuqua <wlfuqu00@uky.edu>
- Date: Mon, 06 Feb 2006 16:41:45 -0500
- In non-linear amplifiers the 60 Hz modulation by the filament is basically cathode modulation. If the voltage applied to a directly heated cathode is not balanced on either side of the filament the e
- /archives//html/Amps/2006-02/msg00140.html (11,097 bytes)
This search system is powered by
Namazu