Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+AL\-82\s+question\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+AL\-82\s+question\s*$/: 4 ]

Total 4 documents matching your query.

1. [Amps] AL-82 Question (score: 1): Author: Joe Musto <joe@jtme.com>; Date: Thu, 18 Jan 2007 16:55:47 -0500; I have an Ameritron AL-82. The SSB/CW switch stopped working. It seems to have no effect. Looking at the schematic, it appears that the switch just shorts a 7.5V zener diode so I am guessing the diod; /archives//html/Amps/2007-01/msg00189.html (6,287 bytes)
2. [Amps] AL-82 question (score: 1): Author: "David J Windisch" <davidjw@cinci.rr.com>; Date: Sat, 26 Dec 2009 14:22:52 -0500; Happy New Year, all: On a 7- or 8-year-old AL-82 I just tested, I noticed that, with the amp's relay pulled in, but no drive applied, the grid-current meter showed 50-70mA upscale, all bands, and zer; /archives//html/Amps/2009-12/msg00538.html (6,728 bytes)
3. Re: [Amps] AL-82 question (score: 1): Author: gudguyham@aol.com; Date: Sun, 27 Dec 2009 08:27:22 EST; There is a small diode standing upright on the edge of the rectifier board, it's probably bad, lift one side and test it, if it is bad, replace with a 1N4007 or similar diode. In a message dated 12/2; /archives//html/Amps/2009-12/msg00551.html (7,845 bytes)
4. Re: [Amps] AL-82 question (score: 1): Author: "Carl" <km1h@jeremy.mv.com>; Date: Tue, 29 Dec 2009 11:00:35 -0500; There is no need to lift it to test. If its good it will test as a diode, if its shorted it will show that. Carl KM1H _______________________________________________ Amps mailing list Amps@contesting; /archives//html/Amps/2009-12/msg00557.html (8,894 bytes)

Current List: 1 - 4
Page: [1]