Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+Grid\s+Meter\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+Grid\s+Meter\s*$/: 3 ]

Total 3 documents matching your query.

1. [Amps] Grid Meter (score: 1): Author: JMLTINC@aol.com; Date: Sun, 19 Nov 2006 11:10:09 EST; Please help me; I have already searched the archives. I have a Henry 3K Ultra (3CX1200A7) that suffered a plate choke flash-over. This took out the diode that holds B- near ground (as well as the saf; /archives//html/Amps/2006-11/msg00231.html (6,468 bytes)
2. Re: [Amps] Grid Meter (score: 1): Author: Gudguyham@aol.com; Date: Sun, 19 Nov 2006 13:24:06 EST; My problem is: when the amp is keyed (no drive) the grid meter slams forward against the peg. Does this with two tubes. Disconnect the filament leads and it does not budge. Check to see if your grid; /archives//html/Amps/2006-11/msg00232.html (6,860 bytes)
3. [Amps] Grid Meter (score: 1): Author: JMLTINC@aol.com; Date: Sun, 19 Nov 2006 13:46:18 EST; Thanks, Lou. First thing I did - the shunt is OK. I should add that power on either tubes is down, with max at 1,500 Watts into a DL. Plate current at full power is about 800ma @ about 4500 volts. Id; /archives//html/Amps/2006-11/msg00233.html (6,692 bytes)

Current List: 1 - 3
Page: [1]