- 1. [Amps] QSK-5 (score: 1)
- Author: k4nr@qth.com (Tom Branch)
- Date: Wed, 11 Dec 2002 23:59:55 -0600
- What's with Key 1 and Key 2 on the QSK-5? It appears that one will work the QSK when the unit is on, the other will operate the amp normally when the unit is off. I don't see a need for both--any rea
- /archives//html/Amps/2002-12/msg00170.html (6,533 bytes)
- 2. [Amps] QSK-5 (score: 1)
- Author: philk5pc@tyler.net (Phil Clements)
- Date: Thu, 12 Dec 2002 01:00:41 -0600
- Key 2 has 5 vdc on it and will supply 1 ma of current to ground when pulled low. This is the line that must be pulled low (>2vdc) to place the QSK switch in the transmit mode during QSK operation. Ke
- /archives//html/Amps/2002-12/msg00171.html (7,666 bytes)
- 3. [Amps] QSK-5 (score: 1)
- Author: jimr.reid@verizon.net (Jim Reid)
- Date: Thu, 12 Dec 2002 08:12:05 -1000
- Tom, K4NR asked: My use: my "fix" was to connect the key/ptt line directly to the "Key 1" input of the QSK-5, and the "External T/R" output on the back of the transceiver is connected to the "Key 2"
- /archives//html/Amps/2002-12/msg00177.html (9,834 bytes)
- 4. [Amps] QSK-5 (score: 1)
- Author: domino at worldlynx.net (Frank Mayer)
- Date: Sun Aug 17 21:26:13 2003
- Can any one tell me how to hook up the Ameritron QSK-5 stand alone qsk switch? I just got one today at a hamfest and it had no manual..I'm somewhat familier with the way it works cause I have the QSK
- /archives//html/Amps/2002-09/msg00391.html (6,208 bytes)
- 5. [Amps] QSK-5 (score: 1)
- Author: jimr.reid at verizon.net (Jim Reid)
- Date: Mon Aug 18 08:19:21 2003
- My use is to connect the key/ptt line directly to the "Key 1" input of the QSK-5, and the "External T/R" output on the back of the transceiver is connected to the "Key 2" input of the QSK-5. I make
- /archives//html/Amps/2002-09/msg00392.html (8,572 bytes)
- 6. [AMPS] QSK-5 (score: 1)
- Author: plantin@tcomlp.com (Bruce Plantin)
- Date: Tue, 06 Feb 2001 09:43:31 -0500
- Hi all, I have a diagram of a Heathkit SB2001-1 QSK board. I believe this board is identcal or also identical to the Ameritron board but have no Ameritron schematic. My confusion is: When in the RX m
- /archives//html/Amps/2001-02/msg00133.html (6,762 bytes)
- 7. [Amps] QSK-5 (score: 1)
- Author: "kingwood" <k5jv@kingwoodcable.com>
- Date: Sat, 15 Aug 2009 11:06:32 -0500
- Greetings to all, Thanks for all of the response to my last post. I was pleasantly surprised at the number. There really are a lot of different ideas on how the QSK-5 operates and methods of it's use
- /archives//html/Amps/2009-08/msg00324.html (9,016 bytes)
- 8. [Amps] QSK-5 (score: 1)
- Author: Stew <k2qe@nycap.rr.com>
- Date: Fri, 11 Mar 2011 06:01:45 -0500
- Has anyone successfully interfaced a QSK-5 with an IC-7700 and a Drake L-7? If yes, please tell me how you ultimately arrived at the proper connection scheme for the "control jacks" (AUX, KEY2, KEY1,
- /archives//html/Amps/2011-03/msg00087.html (6,475 bytes)
This search system is powered by
Namazu