- 1. [Amps] RE : DIN stands for....? (score: 1)
- Author: "hermans" <on4kj@skynet.be>
- Date: Mon, 27 Feb 2006 14:27:40 -0000
- And finally with this BIG DIN-BURGER-STORY, I still wasn't able to find a 8 pin DIN that fits in my FT1000mp to pick-up the band change Data. Be aware, the 7 pins are NOT in a circle, and the eight p
- /archives//html/Amps/2006-02/msg00601.html (10,394 bytes)
- 2. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: "Will Matney" <craxd1@verizon.net>
- Date: Mon, 27 Feb 2006 09:36:19 -0500
- Jos, You may think about using one of those plugs that we've been discussing like a small AMP, etc and mounting it on the rear of the transceiver. If you buy the smallest shell size like size 1 in an
- /archives//html/Amps/2006-02/msg00604.html (11,475 bytes)
- 3. [Amps] RE : DIN stands for....? (score: 1)
- Author: Bill Turner <dezrat@copper.net>
- Date: Mon, 27 Feb 2006 06:51:13 -0800
- ORIGINAL MESSAGE: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Mouser in the US has a lot of 8-pin DIN plugs which will fit the FT-1000MP, but I'm sure there are lots of suppliers in Europe, whe
- /archives//html/Amps/2006-02/msg00607.html (9,079 bytes)
- 4. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: Steve Thompson <g8gsq@eltac.co.uk>
- Date: Mon, 27 Feb 2006 15:34:23 +0000
- There are two variants of 8 pin - the common one in the UK has 7 pins following something approaching a circular pattern. I had to go to a Kenwood dealer to get one for my TS830 - the 7 pins are in a
- /archives//html/Amps/2006-02/msg00609.html (9,734 bytes)
- 5. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: "Robert Dorchuck W6VY" <w6vy@verizon.net>
- Date: Mon, 27 Feb 2006 08:01:11 -0800
- The band data uses a special 8 pin DIN plug - spacing is different than the standard. The arc is 262 degrees. They are available at: http://users.erols.com/rfc/dinconn.htm It is the DB8/262 - it says
- /archives//html/Amps/2006-02/msg00612.html (11,173 bytes)
- 6. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: Bill Turner <dezrat@copper.net>
- Date: Mon, 27 Feb 2006 08:05:22 -0800
- ORIGINAL MESSAGE: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ I stand corrected on the band data connector. On my FT-1000MP I only used the ACC connector and that is a standard 8-pin, common as
- /archives//html/Amps/2006-02/msg00613.html (9,727 bytes)
- 7. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: "Joe Subich, W4TV" <W4TV@subich.com>
- Date: Mon, 27 Feb 2006 11:27:10 -0500
- The only 8-pin connector on the FT-1000 series radios is the band data and it's a DIN8/262. The other connectors are Packet => DIN 5, DVS2 => DIN7, RTTY => DIN4, CAT => DIN6 One reason Yaesu may have
- /archives//html/Amps/2006-02/msg00615.html (10,541 bytes)
- 8. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
- Date: Mon, 27 Feb 2006 17:28:31 +0000
- The Yaesu band data and PTT plug that Jos needs is the same 8-pin 'horseshoe' pattern as the transverter socket on the TS-830. Yaesu use several other DIN types as well. Icom rigs use the 'circular'
- /archives//html/Amps/2006-02/msg00620.html (11,012 bytes)
- 9. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: Mike <k4gmh@arrl.net>
- Date: Mon, 27 Feb 2006 16:10:58 -0500
- Got 7 pin, band data, and 8 pin, accessory, DIN connectors for my Icom from DigiKey. Is there a difference between Icom and Yaesu DIN connectors? 73, Mike, K4GMH _____________________________________
- /archives//html/Amps/2006-02/msg00643.html (10,553 bytes)
- 10. Re: [Amps] RE : DIN stands for....? (score: 1)
- Author: HAROLD B MANDEL <ka1xo@juno.com>
- Date: Mon, 27 Feb 2006 16:44:13 -0500
- DIN is short for, "DIN, DIN S'ALLAH DIN!" _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps
- /archives//html/Amps/2006-02/msg00645.html (6,149 bytes)
This search system is powered by
Namazu