Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+TL\-922\s+80m\s+load\s+issue\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Amps\]\s+TL\-922\s+80m\s+load\s+issue\s*$/: 6 ]

Total 6 documents matching your query.

1. [Amps] TL-922 80m load issue (score: 1): Author: K2CB <k2cb@comcast.net>; Date: Wed, 14 Sep 2016 23:20:48 -0400; Helping a friend with a TL-922. On 80m, it is suffering from not enough loading capacitance. The peak at low drive levels is at 1. If driven to 1kw the peak it not attainable, as it appears to be pas; /archives//html/Amps/2016-09/msg00062.html (7,769 bytes)
2. Re: [Amps] TL-922 80m load issue (score: 1): Author: Louis Parascondola via Amps <amps@contesting.com>; Date: Sat, 17 Sep 2016 09:46:12 -0400; No, it is just the opposite. Grounded grids require LESS drive. It sounds like your padding capacitor is wrong, missing, or bad. It can also be the switching that kicks it in. I recall reading in the; /archives//html/Amps/2016-09/msg00074.html (9,479 bytes)
3. Re: [Amps] TL-922 80m load issue (score: 1): Author: K2CB <k2cb@comcast.net>; Date: Sat, 17 Sep 2016 09:57:51 -0400; Thanks for the reply, Lou. The first thing I suspected was the padding capacitor for 80m, or the additional portion of the loading cap that is switched in on 80m. I checked all the capacitors, as wel; /archives//html/Amps/2016-09/msg00076.html (10,559 bytes)
4. Re: [Amps] TL-922 80m load issue (score: 1): Author: "Joe Subich, W4TV" <lists@subich.com>; Date: Sat, 17 Sep 2016 09:55:02 -0400; Added inductance in the grid lead makes a tube *harder* to drive. Compare the 811/572B and a ceramic triode like the 3CX800 or 8877. For good info on the TL-922 see the information by W8JI: http://ww; /archives//html/Amps/2016-09/msg00077.html (7,930 bytes)
5. [Amps] TL-922 80m load issue (score: 1): Author: "Jim Thomson" <jim.thom@telus.net>; Date: Sat, 17 Sep 2016 10:59:37 -0700; On 80m, it is suffering from not enough loading capacitance. The peak at low drive levels is at 1. If driven to 1kw the peak it not attainable, as it appears to be past the lower limit. I suspected t; /archives//html/Amps/2016-09/msg00084.html (9,890 bytes)
6. Re: [Amps] TL-922 80m load issue (score: 1): Author: Vic Rosenthal 4X6GP <k2vco.vic@gmail.com>; Date: Sun, 18 Sep 2016 04:13:11 +0300; I have always had a similar issue with my TL922 on the CW portion of 80 and the low end of 160. I too checked everything, including the capacitance of the padder, and found nothing wrong. I finally r; /archives//html/Amps/2016-09/msg00090.html (11,605 bytes)

Current List: 1 - 6
Page: [1]