- 1. [Amps] TS430 and the 91b (score: 1)
- Author: Robert Thain <g0hgw@yahoo.com>
- Date: Thu, 9 Oct 2003 08:30:25 +0100 (BST)
- Hi, Variable power TS430 I would like to use my amp with my TS430. However it only requires 50Ws input. There is no control on the 430 to vary the power. I understand that something can be done with
- /archives//html/Amps/2003-10/msg00069.html (6,713 bytes)
- 2. Re: [Amps] TS430 and the 91b (score: 1)
- Author: R.Measures <r@somis.org>
- Date: Thu, 9 Oct 2003 05:54:55 -0700
- ** The power level adjustment on the TS-430S is internal. ** One way to control an amplifier from a TS-430S is to use the "RL" output (+12v on TX) on the Accessory jack to T/R-switch the amplifier.
- /archives//html/Amps/2003-10/msg00072.html (8,306 bytes)
- 3. Re: [Amps] TS430 and the 91b (score: 1)
- Author: GGLL <nagato@arnet.com.ar>
- Date: Thu, 09 Oct 2003 23:14:10 -0300
- Hello Robert, If I don't miss, there are two pins at filter board of ts 430, shorting them limits maximum output power to 50 Watts, at all bands. Another method is to tweak down output power trimmer
- /archives//html/Amps/2003-10/msg00075.html (8,099 bytes)
- 4. Re: [Amps] TS430 and the 91b (score: 1)
- Author: "Kenneth D. Grimm, K4XL" <kgrimm@adelphia.net>
- Date: Fri, 10 Oct 2003 09:44:04 -0400
- Several years ago, I was faced with the same problem using a Collins KWM-380 to drive a tetrode that took very little drive. Since the KWM-380 put out 100W, I needed to provide "artificial" ALC volt
- /archives//html/Amps/2003-10/msg00076.html (9,105 bytes)
- 5. Re: [Amps] TS430 and the 91b (score: 1)
- Author: "Durwydd MacTara" <durwydd@hotmail.com>
- Date: Fri, 10 Oct 2003 17:56:25 +0000
- check mod.dk for the QRP mod for the TS-520 this mod works FB for using the ALC in on the accessory jack on all Kenwood radios, though you may need to modify the pin connections at the DIN plug, the
- /archives//html/Amps/2003-10/msg00078.html (10,023 bytes)
This search system is powered by
Namazu