- 1. [Karlnet] Prism2 cards (score: 1)
- Author: Leszek Olszewski <leszek@oslink.pl>
- Date: Tue, 04 Jun 2002 17:48:54 +0200
- Hello, Is there a Prism2 card that works with Karlnet, has two antennas connector and allows separation to connect transmit antenna on one connector and receive to the other? Cisco cards allow that b
- /archives//html/Karlnet/2002-06/msg00000.html (7,844 bytes)
- 2. RE: [Karlnet] Prism2 cards (score: 1)
- Author: "Charles Chia Sheng Wu" <cwu@cwlab.net>
- Date: Tue, 4 Jun 2002 11:23:47 -0500
- Ciscos don't work w/ KarlNet we've got a 100mW prism card w/ 2 connectors on it - but we're happy just using on of the two pricing is pretty good too -Charles Hello, Is there a Prism2 card that works
- /archives//html/Karlnet/2002-06/msg00004.html (8,463 bytes)
- 3. RE: [Karlnet] Prism2 cards (score: 1)
- Author: Leszek Olszewski <leszek@oslink.pl>
- Date: Tue, 04 Jun 2002 18:38:55 +0200
- That sounds fine but I need to connect two antennas - one with higher gain to the receive connector and other with lower gain to transmit connector. That is to comply with ETSI rules and 20dBm EIRP p
- /archives//html/Karlnet/2002-06/msg00005.html (9,607 bytes)
- 4. Re: [Karlnet] Prism2 cards (score: 1)
- Author: Scott Stevens <scott@scottstevens.net>
- Date: Tue, 04 Jun 2002 11:25:24 -0600
- Turbocell will support Intersil 2.0 and 2.5 and Lucent cards. Cisco is a VERSION of 2.0, but has been Ciscotized (won't work). Also it helps if you flash the RG with the .bin while the 2.x card is in
- /archives//html/Karlnet/2002-06/msg00006.html (8,766 bytes)
- 5. RE: [Karlnet] Prism2 cards (score: 1)
- Author: "Tony " <tonylist@wwwbiz.com>
- Date: Tue, 4 Jun 2002 23:29:53 -0400
- Leszek Our cards work with Karlnet but Prism will only work in TurboCell mode at this point. Cisco is a proprietary solutions that KN does not support. http://www.demarctech.com/products/relia-wave-1
- /archives//html/Karlnet/2002-06/msg00007.html (8,996 bytes)
This search system is powered by
Namazu