- 1. [Orion] Powering the fan and 238B from the Orion? (score: 1)
- Author: Eric Rosenberg <wd3q@starpower.net>
- Date: Tue, 14 Sep 2004 02:10:27 -0400
- Not sure if I can do this... but I'd like to power the Orion's add-on fan and the 238B tuner (s-meter, or so it seems) from the 13.8v output on the Orion. Is this okay or too much of a load? Some rev
- /archives//html/Orion/2004-09/msg00008.html (6,654 bytes)
- 2. Re: [Orion] Powering the fan and 238B from the Orion? (score: 1)
- Author: Bill Tippett <btippett@alum.mit.edu>
- Date: Tue, 14 Sep 2004 07:35:08 -0400
- W3DQ: and the 238B tuner (s-meter, or so it seems) from the 13.8v output on the Orion. Fan should be OK but I would be concerned about a ground loop between Orion and the tuner. 73, Bill W4ZV _______
- /archives//html/Orion/2004-09/msg00009.html (6,867 bytes)
- 3. Re: [Orion] Powering the fan and 238B from the Orion? (score: 1)
- Author: Ralph Irish <w8roi@peoplepc.com>
- Date: Tue, 14 Sep 2004 11:05:21 -0400
- Eric & group I will be very surprised if the extra couple of panel lamps will overload that 13.8VDC output on the ORION's back panel. If it does, shame on Ten Tec! I would have to find the manual and
- /archives//html/Orion/2004-09/msg00010.html (8,310 bytes)
This search system is powered by
Namazu