- 1. [RTTY] TX problem (score: 1)
- Author: "Dick White" <whiter26@sbcglobal.net>
- Date: Tue, 23 Aug 2011 14:01:32 -0500
- I spent some time in the SARTG and Rookie contests this past weekend. I was running 90 watts ( don't have amp) and an external cooling fan. During the SARTG contest rig would stop transmitting. By tu
- /archives//html/RTTY/2011-08/msg00293.html (7,561 bytes)
- 2. Re: [RTTY] TX problem (score: 1)
- Author: Gedking@aol.com
- Date: Tue, 23 Aug 2011 18:58:49 -0400 (EDT)
- Never run more than 50% power on RTTY It's like putting a Brick on your CW KEY In a message dated 8/23/2011 3:01:30 P.M. Eastern Daylight Time, whiter26@sbcglobal.net writes: I spent some time in the
- /archives//html/RTTY/2011-08/msg00301.html (8,249 bytes)
- 3. Re: [RTTY] TX problem (score: 1)
- Author: Doug Hall <k4dsp.doug@gmail.com>
- Date: Tue, 23 Aug 2011 19:34:33 -0400
- Perhaps that applies to some rigs, but the last 4 radios I have used for RTTY contesting and DXing (Kenwood TS-850, Kenwood TS-2000, Icom 756Pro3, and Yaesu FT-1000MP) had no problems running 100w on
- /archives//html/RTTY/2011-08/msg00307.html (7,370 bytes)
- 4. Re: [RTTY] TX problem (score: 1)
- Author: "Bill, W6WRT" <dezrat1242@yahoo.com>
- Date: Tue, 23 Aug 2011 17:11:34 -0700
- ORIGINAL MESSAGE: REPLY: The fact that it gets worse over time sounds like a heat problem rather than a software problem. If you back the TX power way down does the problem go away? 73, Bill W6WRT __
- /archives//html/RTTY/2011-08/msg00310.html (7,410 bytes)
- 5. Re: [RTTY] TX problem (score: 1)
- Author: "Dick White" <whiter26@sbcglobal.net>
- Date: Tue, 23 Aug 2011 20:56:30 -0500
- Bill,W6RT and others, I found the operator error problem and now I can transmit. By sending CQ a few times, the cooling fan comes on as it is supposed to do. However, I sent CQ for about 2 minutes, s
- /archives//html/RTTY/2011-08/msg00318.html (8,114 bytes)
- 6. Re: [RTTY] TX problem (score: 1)
- Author: "Bill, W6WRT" <dezrat1242@yahoo.com>
- Date: Tue, 23 Aug 2011 19:55:07 -0700
- ORIGINAL MESSAGE: REPLY: First, I'd suggest make sure the fan is running full speed and is not obstructed by dust or a foreign object. In fact, I would take the cover off and give the rig a good dust
- /archives//html/RTTY/2011-08/msg00319.html (8,110 bytes)
This search system is powered by
Namazu