WARNING!! I'm prolix when I use a keyboard! I'm a pretty new ham who started as a General because I primarily want to work QRP CW on HF. I was looking for an old rig that I could pretty much plug 'n
Before I did a lot of trouble shooting on that Century 21, I'd make sure it was connected to a proper aerial and see if the birdies are still audible. Testing for birdies with no antenna connected gi
Are you sure you are hearing 5 Hz.......? How did you determine it was 5 Hz... That is an extremely low frequency that one could feel but hear....maybe with that low of frequency response in your hea
You CAN hear 5 Hz tone burst. Same as slow CW. He obviously is using his BFO and thus is hearing burst rather than a 5 Hz sinusoidal signal. 73 Bill wa4lav To: <tentec@contesting.com>
Sorry I failed to make clear that a *tone* I could hear was going on and off at 5 Hz. In addition to being able to hear what sounded like unmodulated carriers at different frequencies that I could tu
Author: geraldj@isunet.net (Dr. Gerald N. Johnson, electrical engineer)
Date: Thu Aug 21 13:29:20 2003
Tighten the PC board mounting screws. Could be bad grounds from loose screws where the plastic has flowed under pressure. 73, Jerry, K0CQ -- Entire content copyright Dr. Gerald N. Johnson, electrical