I spent a long time today trying to get FSK RTTY to work on my Orion. I am using MMTTY ver 1.65 and TxD from a serial port to key the FSK TX data via the AUX I/O jack. I couldn't get anyone to answer
Bill, I had the same experience the other day. I just received my Orion last week and had built my interface to connect the computer, FSK, voice keying, CW keying, ect. I was trying to work YI9ZF on
I'm confused. I'm waiting for my Orion to arrive, and getting the setup ready, including FSK from my HAL DXP-38. Running FSK on my Omni VI+, the RX is in LSB mode (rig is in FSK), regardless of band,
I am in the midst of comparing my vintage MP vs. my Orion, but I am reluctant to make any final conclusions until I'm confident that I've mastered the proper use and interactions associated with the
I am in an in-depth discussion with folks on the Icom 756 PRO II Yahoo Reflector about contesters switching to the Orion. I made the statement that contesters are fast making the Orion the contest ra
Hi Charlie, I'm not sure if I qualify as a "prominent contester". I have put many hours in the chair at K1RX m/m. I switched from the Icom Pro II to the Orion. I miss the band scope on the Pro II but
Joe, I am in the process of comparing my new Orion to my FT1000MP. I predominately operate SSB and mostly DXing. I don't see any measurable difference in sensitivity, but IMD and selectivity is a who
Hi fellows: My Orion is working fine with the Writelog, but there is no way to make it work with the DX4WIN. I´m using the Windows 98 and I inserted the Orion Tentec file on radios, now Orion i
Oms, My works fine with the Address & Baudrate check mark in Default and the DTR High unchecked and the RTS High checked. 73, Alan _______________________________________________ Orion mailing list O
Oms, Mine works FB.... Make sure DX4Win preferences section for the Radio has DEFAULT checked and DTR and RTS must be checked also. 73/ Larry K1UO _______________________________________________ Orio
OK, Merle. Frankly, I believe your assessment regarding adjacent frequency strong signal QRM and I was coming to the same conclusion on CW I was reluctant to say anything until I did more fiddling an
OK, Chas. I already commented to an earlier respondent with a similar opinion, but I wanted to mention a couple more things things. I have installed all of the available roofing filters in my Orion.
OK, Chas. I already commented to an earlier respondent with a similar opinion, but I wanted to mention a couple more things things. I have installed all of the available roofing filters in my Orion.
Hello to the Orion-group! I try to write down my opinion in simple english. Changed from 1000MP (not Mark V) to IC-756 Pro II and never missed the 1000MP yet. Now i have also the Orion in the shack
Both are checked and still not working. Interesting is the fact that on Writelog is working perfectly. I have two notebooks and one is W2000 and the 98 and Orion is not working with DX4win on both co
i TESTED ALL POSSIBILITIES ON DTR AND RTS THANKS OMS --Mensagem original-- De: Larry Emery [mailto:k1uo@prexar.com] Enviada em: sábado, 17 de abril de 2004 22:22 Para: py5eg Cc: ORION (E-mail)
Hi folks: Thanks for all the tips. I tryed everything and I don't have my Orion working with the DX4WIN. Interesting that works fine with the Writelog. Windowns 2000 My setup of the DX4WIN - Radios i
I have a loaded Orion on the bench with an FT1000D and A TS950 (with 250hz and 125 hz INRADS for CW) The Orion beats both on pile-up condx and weak signal condx. If I only had room for a 7800, (and p
Quick question for the learned group -- in RX, regardless of how little signal is present, the S-meter stays a tad over S1. In transmit, with no output, it goes to zero, but as soon as it switches ba