John (1) Are you using the 302J tuning encoder? (2) Is the tuner grounded? (3) Is your ground daisy chained from one item to another or do you ground each item directly to a central point and then ou
I hear this comment frequently on the bands and am beginning to wonder just what symptom(s) are present that lead to the diagnosis of "RF in the audio?" How is that conclusion reached based upon what
A key missing point here is what kind of transmatch and antenna is being used? Also, how long is the connection to earth ground, if any, especially is it a critical quarter wave at the band with prob
One of the best tools I have used to chase down RFI problems (besides burning your lip on a microphone putting out a hundred watts) is the el-cheapo Radio Shack SWR/field strength meter. In the field
I have RF floating all over my shack. Monitor it on a home built Field Strength Meter with 200 micro amp meter and a 2 inch ant on it. With meter located at op position I have full scale RF from my r
Carl, Good comments. Remember all, the Ten Tec radios benefit by not being right by the noisy computer cabinet. Same for Monitors, they are the most RF noisy of the computer components. See if you ca
Hi Bob: I think you miss-read my e-mail. I do not have any problem with RFI or RF in any of my equipment with my set up. Computer, Telephone or TV using my present grounding system. No hot spots. I w
I have my Jupiter on a shelf just above my monitor and have no problems. One thing I do have is a filter on the DC input, close to the rig, which was there for my Scout. I had some problems with thin