Author: "Winston F. Jones" <winjones@ix.netcom.com>
Date: Wed, 22 Oct 2003 21:25:11 -0400
Has anybody else tried to install Version 1.25 update of the Jupiter software which was released today? The installer program won't work for me. Anybody else having a problem with it? 73, Winston K4C
Winston, It worked fine for me. I am using XP Professional and a USB to serial converter. 73, John Has anybody else tried to install Version 1.25 update of the Jupiter software which was released tod
Date: Wed, 22 Oct 2003 21:48:45 -0400 (Eastern Standard Time)
Same problem here, with 400 Mhz, ME system and USB to serial adapter. Craps out every time with errors. Duffy www.wb8nut.com --Original Message-- From: Winston F. Jones; tentec@contesting.com Date: W
Installed with no problem for me at all... Mike, W9WIS _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
And my laptop has Win 98SE.... Mike, W9WIS _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
I have been running Windows ME for 2 years now with virtually no problems. But in order for Windows ME to work properly with the COM1 serial port, a change to the registry is required. For those of y
Author: "Winston F. Jones" <winjones@ix.netcom.com>
Date: Wed, 22 Oct 2003 22:54:18 -0400
I'm running Windows ME. This must be the problem. However, I've never had any problems before until trying this upgrade. I get an error message about the Com 1 port. Thanks 73, Winston K4CWQ the Crap
Has anyone on this list successfully downloaded to the ARGO V, Jupiter or Orion using a laptop with Windows ME....specifically ME please. I have heard from TenTec techs that ME has caused ongoing pro
Might be prudent to do a register backup first. 73, Troy, W6HV -- Original Message -- From: "Carl Moreschi" <n4py@earthlink.net> To: <tentec@contesting.com> Sent: Wednesday, October 22, 2003 7:43 PM
Author: "Winston F. Jones" <winjones@ix.netcom.com>
Date: Thu, 23 Oct 2003 13:12:00 -0400
I have Windows ME and I had problems on the latest download. Never had these problems before. I had a hard time getting program to execute and then got an error message that it wouldn't initialize CO
Joe, I only use windows ME and have no problems. But see my earlier post about the registry change that may be needed for COM1 on windows ME. 73, Carl Moreschi N4PY Franklinton, NC -- Original Messag
Howdy Carl: Saw your original note after I sent my note.....many thanks for the info...will give it a try. 73, Joe W2KJ _______________________________________________ TenTec mailing list TenTec@cont
I upgraded from 1.24 to 1.25 today with WinXP and COM2. Piece of cake. Now if there was a feature so I could just turn AGC off so I could control it manually via RF gain :-) regards, Jason W0JSB ____
Date: Thu, 23 Oct 2003 22:04:34 -0400 (Eastern Standard Time)
I finally got it to work using a standard serial port on an XP laptop computer. Obviously it seems that the problem was not Win ME, but the USB to Serial adapter cable - which works fine with everyth
shack That's not suprising. I have found that those USB serial ports are not 100% compatible with all software. I ordered one and found that it wouldn't work with the N4PY Pegasus control software,
Date: Fri, 24 Oct 2003 09:06:01 -0400 (Eastern Daylight Time)
I have used several different USB to serial adapters and up until this time, have not had a problem. Currently I have Comm 1 set up to control the TNC for APRS. Comm 2 (additional serial port via an
The USB/Serial adapters are still sort of buggy. I have two.... one works perfectly with several control programs.... all but one. The other also works perfectly... with all but one, and it's a diffe
I had a problem with this as well but it turned out to be one of the two cables I had connected to give me the length I needed. When I removed the short serial cable extension all went well. I'll hav
I had a problem with this as well but it turned out to be one of the two cables I used to give me the length I needed. When I removed the short serial cable extension all went well. I'll have to pick