I need to know the pinout of the 9-pin OMNI D accessory jack. I have looked a several of the online manuals and everyone is missing the block diagram which has this information. I am guessing that it
Joe go to the TT homepage and download obsolete manuals. Hope that helps. Good luck I need to know the pinout of the 9-pin OMNI D accessory jack. I have looked a everal of the online manuals and ever
Here's what I'm seeing: 1. T (transmit control sig) 2. +REG 3. +13 4. REM VFO 5. LO 6. MUTE C 7. MUTE NO 8. GND 9. MUTE NC 73, Barry N1EU _______________________________________________ TenTec mailin
Thanks Barry. Now I am confused. N4RS provided a pinout which is very different from this. Could someone please clarify. Maybe there is more than one configuration. __________________________________
I will send you the one I have... maybe it has it... don't know. I have about 50 old TT manuals scanned on my computer. == JHR == == _______________________________________________ TenTec mailing lis
One of the manuals I have says the pin outs are explained on the MIN BLOCK DIAGRAM. Maybe this helps... depending on if you can find the main block diagram... == James -K8JHR == -- __________________
Yes, that is what it says. The only problem is that every online manual I have seen does not have that page. -- Original Message -- From: "Richards" <jruing@ameritech.net> To: "Discussion of Ten-Tec
Man... that really sucks. Hopefully one of the scans I sent you has it. If not... sorry. My road to Heck is well paved with all my good intentions. == James -K8JHR == -- _____________________________
Wasn't following this thread; been away on business to a Hamfest. Here is the Pinout: Pin Function 1 T (generated on Control Board 80464) 2 + Reg (approx. +8v generated on Control Board 80464) 3 +13v
Thanks Rick. It looks as if Ten Tec never settled on the pin definitions. They are difference between the OMNI versions. I was hoping that they were all like the Corsair II, but not so. -- Original M