- 1. [TenTec] Omni VI+ problem (score: 1)
- Author: vsantis@earthlink.net" <vsantis@earthlink.net (Vincent A. Santis)
- Date: Sat, 20 Apr 2002 20:21:31 -0400
- Hi, I've developed a problem with my VI+. On 80 and 40 meters I have uninteligible audeo, I can't seem to tune in on a signal and audio is reduced. All this on lsb of course, usb bands are Ok. Any he
- /archives//html/TenTec/2002-04/msg00623.html (6,734 bytes)
- 2. [TenTec] OMNI VI+ Problem (score: 1)
- Author: jdroller@tricon.net (Jimmy D. Roller)
- Date: Mon, 23 Aug 1999 11:41:16 -0400
- Has anyone encountered this problem before? My 7 year old OMNI VI+ (option 1) has developed a problem with drawing excessive current on 15 meters. All other bands behave normally, but on 15 meters, I
- /archives//html/TenTec/1999-08/msg00302.html (9,067 bytes)
- 3. [TenTec] OMNI VI+ Problem (score: 1)
- Author: geraldj@ames.net (Dr. Gerald N. Johnson, P.E.)
- Date: Mon, 23 Aug 1999 10:39:17 -0500
- First check the PC board mounting and grounds. Might be just the right number loose to get RF feedback and oscillation. Check the parts in the 15m low pass filter, might be some out of tolerance. I w
- /archives//html/TenTec/1999-08/msg00303.html (7,289 bytes)
- 4. [TenTec] OMNI VI+ Problem (score: 1)
- Author: weingaertner@nac.net (Robert Weingaertner)
- Date: Tue, 24 Aug 1999 20:38:41 -0400
- I had a similar problem on one band with my Corsair I. I think that the problem turned out to be an open or wrong value capacitor in the final low pass filter. If the match were perfect, it would tri
- /archives//html/TenTec/1999-08/msg00328.html (10,592 bytes)
- 5. [TenTec] Omni VI+ problem (score: 1)
- Author: "Paul DeWitte K9OT" <k9ot@mhtc.net>
- Date: Sun, 7 Dec 2003 11:52:13 -0600
- My Omni VI+ that just came back from TN a week ago failed about 10 hours into the 160m contest. It started tripping the power supply. I thought it was the power supply, so I tried a different one wit
- /archives//html/TenTec/2003-12/msg00232.html (7,451 bytes)
- 6. Re: [TenTec] Omni VI+ problem (score: 1)
- Author: "Mike Hyder --N4NT--" <N4NT_Mike.Hyder@charter.net>
- Date: Sun, 7 Dec 2003 13:04:07 -0500
- Some of the older rigs, particularly the Triton 4's, could lose the diodes that develop the AGC voltage due to a static discharge or the like. Without those diodes working, when the Drive is advanced
- /archives//html/TenTec/2003-12/msg00234.html (9,240 bytes)
- 7. [TenTec] Omni VI+ problem (score: 1)
- Author: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
- Date: Mon, 08 Dec 2003 15:10:34 +0000
- Not sure if this is on target or not, but with my VI/3 a few weeks ago a snapping sound began emanating from the back of the rig whenever I hit voice peaks or went key down on cw. At first I thought
- /archives//html/TenTec/2003-12/msg00262.html (8,185 bytes)
- 8. [TenTec] OMNI VI+ problem (score: 1)
- Author: Don Rasmussen <wb8yqj@yahoo.com>
- Date: Fri, 11 Mar 2011 11:24:50 -0800 (PST)
- Hi Guys, My OMNI 564 started acting a little odd today, I thought I would see if anyone has any suggestions as far as things to consider before packing the unit up for shipment to the factory for s
- /archives//html/TenTec/2011-03/msg00114.html (8,660 bytes)
- 9. Re: [TenTec] OMNI VI+ problem (score: 1)
- Author: "Dr. Gerald N. Johnson" <geraldj@weather.net>
- Date: Fri, 11 Mar 2011 13:46:37 -0600
- The crystals are phase locked by the control board. I'd expect it to remain the same from 28.0 to 28.5 since the crystal and reference remain unchanged over that range. Probably a slight tweak of the
- /archives//html/TenTec/2011-03/msg00115.html (9,327 bytes)
- 10. Re: [TenTec] OMNI VI+ problem (score: 1)
- Author: k3miy@csonline.net
- Date: Fri, 11 Mar 2011 18:45:15 -0500
- Don Had a similar problem with my V. What is your ambient temperature? If it is high, that might cause the problem. There is some sort of paste in a small can in the rig. se if it is dried out. Ron K
- /archives//html/TenTec/2011-03/msg00116.html (9,565 bytes)
This search system is powered by
Namazu