Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+OMNI\s+VI\s+PROBLEM\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[TenTec\]\s+OMNI\s+VI\s+PROBLEM\s*$/: 9 ]

Total 9 documents matching your query.

1. [TenTec] Omni VI problem (score: 1): Author: Mike" <zl1mh@nzart.org.nz (Mike); Date: Tue, 13 Aug 2002 18:26:35 +1200; Greetings everybody. After nearly 7 years of trouble-free service my Omni VI has suddenly developed a strangeness! Working into either a properly matched antenna, or into a dummy load. at any power &; /archives//html/TenTec/2002-08/msg00216.html (7,608 bytes)
2. [TenTec] Omni VI Problem (score: 1): Author: geo@ipass.net (George McCrary); Date: Wed, 12 Nov 1997 22:56:59 -0500; Hello Folks, I haven't even opened my 6 up yet to look for this problem, I thought I'd see if anyone has seen it before. I recently noticed that after changing bands the RX would seem to lose sensiti; /archives//html/TenTec/1997-11/msg00087.html (7,613 bytes)
3. [TenTec] Omni VI Problem (score: 1): Author: chestert@pressroom.com (Chester Alderman); Date: Thu, 13 Nov 1997 06:56:42 -0500; Gordon and George, I'm not a TenTec expert, just a user. However in the six years I've had my Omni 6 (now upgraded to Plus), I have not experience any problems with it. Like in NO problems. This radi; /archives//html/TenTec/1997-11/msg00088.html (9,923 bytes)
4. [TenTec] OMNI VI PROBLEM (score: 1): Author: 0007359114@MCIMAIL.COM (Bill Straw); Date: Fri, 14 Nov 1997 21:35:37 -0500 (EST); This is somewhat of an esoteric question, I hope I can get a response from the reflector! I run the NA contesting program and have the OMNI VI connected to serial port 1. It has worked really well, t; /archives//html/TenTec/1997-11/msg00107.html (7,663 bytes)
5. [TenTec] Omni VI problem (score: 1): Author: "Jeff Kelly" <jkelly@bellatlantic.net>; Date: Sun, 25 Jan 2004 10:12:34 -0500; Woke up this morning to a problem with my OmniVI Opt/1 and 962. On startup there is a buzz (brrrrrr) for a few seconds form the rear center to left of the radio and the display comes up a half bright; /archives//html/TenTec/2004-01/msg00782.html (7,985 bytes)
6. Re: [TenTec] Omni VI problem (score: 1): Author: "Don K5AQ" <donhall@myriad.net>; Date: Sun, 25 Jan 2004 10:46:00 -0600; Jeff, Try the master reset a couple more times. Mine went berserk while I was adjusting the 10mHz clock and it took two or three times to get it all ok. Works like a champ now. 73 Don K5AQ __________; /archives//html/TenTec/2004-01/msg00783.html (7,605 bytes)
7. Re: [TenTec] Omni VI problem (score: 1): Author: "Gert Meinen" <pa3aav@hetnet.nl>; Date: Mon, 26 Jan 2004 09:40:44 -0000; Jeff, The buzz is probably from relay K1on the DC input board switching in and out. I had this a while ago with my Omni 6..happened to be a driver transistor in the PA who shorted the supply voltage; /archives//html/TenTec/2004-01/msg00810.html (9,550 bytes)
8. Re: [TenTec] Omni VI problem (score: 1): Author: "Gert Meinen" <pa3aav@hetnet.nl>; Date: Mon, 26 Jan 2004 09:45:34 -0000; Jeff, The noise is probably from relay K1 on the DC input board switching in and out. I had this a while ago with my Omni 6...happened to be a driver transistor in the PA section which did short the; /archives//html/TenTec/2004-01/msg00811.html (9,352 bytes)
9. [TenTec] OMNI VI Problem (score: 1): Author: OTAKEBI@aol.com; Date: Mon, 5 Oct 2009 13:11:57 EDT; N6KB is on the right road. I had same problem on an OMNI V. When I would transmit the reading on the OMNI was right on frequency but my frequency counter would indicate out of band transmit. Got to t; /archives//html/TenTec/2009-10/msg00027.html (7,220 bytes)

Current List: 1 - 9
Page: [1]