Hello all, I wonder if anyone has been through this before? I have successfully used digital modes for some time with a Yaesu FT857D. I have been trying a couple of different ways to get my OMNI VII
Monday morning, Brian: I use the ACC-1 port for digital and it works fine with SINGNALINK , A TIGERTRONICS PRODUCT. There were a variety of AUDIO selections to choose, so it took me a couple of hours
First we presume you are connecting via the AUX DIN connector on the rear panel. And via the MENU you have selected AUDIO SOURCE to be LINE. Then the next line below on the MENU the LINE GAIN set to
Amen. I paid a mere $16 for my 4-port serial adapter -a very cheap way to add 4 "real" serial ports to the box. I have touted this solution on several ham reflectors. A few report success following s
Thank you Bob, The computer is selecting the correct sound card. It does receive properly from the LINE OUT on the read ACC1 of the OMNI VII. I tried setting it to LINE INPUT and upped the gain to 65
And do they make this 4 port serial adapter for a Toshiba Laptop? _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinf
Turn the MON function ON at the radio and see what it sounds like. Should sound and be very clean. If nothing is heard then there is likely a problem in the radio or the audio is not reaching the Lin
I Use an 8 port USB to serial FTDI adapter. I have never had any problems with it at all and it gives me 8 serial ports that work fine even on a laptop. I use it for software development for all my r
Great suggestion - I will try that this afternoon before I start using the oscilloscope. Best regards - Bry Carling _______________________________________________ TenTec mailing list TenTec@contesti
Bob thank you for the excellent tip! Yes when I turn MON on and bring it up I can hear a nice audio signal playing JT65 tones when I transmit. But still no RF out. The OMNI VII refuses to transmit th
mic gain for line input. Carl Moreschi N4PY 58 Hogwood Rd Louisburg, NC 27549 www.n4py.com Yes when I turn MON on and bring it up I can hear a nice audio signal playing JT65 tones when I transmit. Bu
From the MENU: Set keying loop to OFF Audio Source to LINE Line Gain to 50% TX Equalizer to 0 dB SSB TX BW to 3000 TX Rolloff to 100 Hz Speech Processor to OFF From the front panel: Set PWR to 100 Sp