- 1. [TenTec] Omni "C" readout (score: 1)
- Author: Blky4u@wmconnect.com (Blky4u@wmconnect.com)
- Date: Tue May 27 22:45:03 2003
- I recently purchased a Omni D series C that is in really nice condition but there is a problem with the readout. When I first turn the radio on the leading didget is wrong. Example: 80 meters reads 2
- /archives//html/TenTec/2003-05/msg01074.html (7,595 bytes)
- 2. [TenTec] Omni "C" readout (score: 1)
- Author: N4NT_Mike.Hyder@charter.net (Mike Hyder -N4NT-)
- Date: Tue May 27 23:48:41 2003
- Take the digital display apart enough to unplug and re-seat every circuit board. Then, while you are at it, do the same with every circuit board in the rig. Most troubles can be rectified this way. 7
- /archives//html/TenTec/2003-05/msg01077.html (8,315 bytes)
- 3. [TenTec] Omni "C" readout (score: 1)
- Author: geraldj@isunet.net (Dr. Gerald N. Johnson, electrical engineer)
- Date: Wed May 28 13:48:09 2003
- That connector movement will be more effective if a quarter drop of DeoXit from Caig Labs is applied to each contact. Don't spray, use the dropper bottle and the tiniest amount on each connection. 73
- /archives//html/TenTec/2003-05/msg01083.html (7,028 bytes)
- 4. [TenTec] Omni "C" readout (score: 1)
- Author: ve1adh@yahoo.ca (David McClafferty)
- Date: Thu May 29 19:41:34 2003
- You're not getting the correct presets to the counter. On 80 and 40 a one should be preset by diode D7 on the "Preset Amp Board" (80465). Check this diode and the other diodes and transistors on this
- /archives//html/TenTec/2003-05/msg01151.html (8,602 bytes)
This search system is powered by
Namazu