My Omni VI has developed a strange tuning behavior. When I tune through a CW signal, instead of the tone continuously varying as I tune through it, the tone changes in discreet steps every 150 or 200
Never heard it on the air, but I do it hear it on birdies. 73 Doug W5GA My Omni VI has developed a strange tuning behavior. When I tune through a CW signal, instead of the tone continuously varying a
John it may be a PLL problem. Ron K3MIY My Omni VI has developed a strange tuning behavior. When I tune through a CW signal, instead of the tone continuously varying as I tune through it, the tone ch
You might want to check your tuning rate. It's in Menu 3 and comes up as SPD. Dave WA3MKB John it may be a PLL problem. Ron K3MIY --Original Message-- From: tentec-bounces@contesting.com [mailto:tent
Dave, John, I second that suggestion. My K2 exhibits the same behavior as I increase the tuning rate but since I couldn't explain the root cause; I didn't feel it would be a sensible submittal. Dave.
Thanks for the tip, Dave; that was one of the first things I thought of, too. It's set at 1 kHz per turn for both SSB and CW. 73 - John, W4AU _______________________________________________ TenTec ma
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Wed, 22 Apr 2009 03:41:56 -0600
The shaft encoder does a fixed number of steps per revolution. To tune fast the size of the synthesizer steps must increase. So with fast tuning you find 100 Hz or larger steps. Way back, some synthe
There is a tuning step setting in the menu as I recall. Of course, I could be thinking of another radio, but it would be wise to check. Can't recall if it's menu #1 or menu #2 or menu #3. 73 Bob, K4T