- 1. [TenTec] Orion II: nothing at startup (score: 1)
- Author: John K3GHH <k3ghh@arrl.net>
- Date: Tue, 06 Nov 2012 08:57:06 -0500
- Several times in the past few days my O2 (firmware 3.028) has had no transmit output, and no audio output except faint background hiss, when I first turn it on. The paddles produce a nice sidetone, b
- /archives//html/TenTec/2012-11/msg00027.html (7,805 bytes)
- 2. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: "Robert Mcgraw" <rmcgraw@blomand.net>
- Date: Tue, 6 Nov 2012 08:37:26 -0600 (CST)
- Most likely on the power distribution board and the -20V not coming up. Likely cause, filter caps need replacement. I suggest using the same value of MFD and Voltage but go to 105 degree C rated comp
- /archives//html/TenTec/2012-11/msg00028.html (8,329 bytes)
- 3. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: Carl Moreschi <n4py3@earthlink.net>
- Date: Tue, 06 Nov 2012 10:34:24 -0500
- Also, this could easily be caused by one of the pins on the cable behind the front panel not making good contact. I have seen this many times on different Orion's and you can get almost any symptom f
- /archives//html/TenTec/2012-11/msg00029.html (9,433 bytes)
- 4. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: Russ Straate <rstraate@gmail.com>
- Date: Tue, 6 Nov 2012 15:05:29 -0600
- Might also check the backup battery. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
- /archives//html/TenTec/2012-11/msg00031.html (11,011 bytes)
- 5. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: Rod Greene <w7zrc@yahoo.com>
- Date: Tue, 6 Nov 2012 13:34:47 -0800 (PST)
- Good afternoon, I just had a similar problem with my Orion II. I replaced the battery, removed the front panel, cleaned and reseated all the connectors, but the real problem was the 470mfd caps on th
- /archives//html/TenTec/2012-11/msg00032.html (12,147 bytes)
- 6. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: John K3GHH <k3ghh@arrl.net>
- Date: Fri, 28 Dec 2012 07:28:58 -0500
- So far, at least, switching the Orion's power off and then back on has restored operability (e.g., the tuner's meter shows forward power 115w on 80m CW). I just checked the power supply (it's on the
- /archives//html/TenTec/2012-12/msg00196.html (9,180 bytes)
- 7. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: "Peter Frenning [OZ1PIF]" <peter@frenning.dk>
- Date: Fri, 28 Dec 2012 20:45:48 +0100
- Den 28-12-2012 13:28, John K3GHH skrev: On 11/06/2012 08:57 AM, John K3GHH wrote: Several times in the past few days my O2 (firmware 3.028) has had no transmit output, and no audio output except fain
- /archives//html/TenTec/2012-12/msg00204.html (11,364 bytes)
- 8. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: "Rodney" <w3krq@dejazzd.com>
- Date: Fri, 28 Dec 2012 20:45:43 -0500
- it is the capacitors on the regulator board this is the small board on the bottom of the orion --Original Message-- From: Peter Frenning [OZ1PIF] Sent: Friday, December 28, 2012 2:45 PM To: Discussio
- /archives//html/TenTec/2012-12/msg00213.html (12,241 bytes)
- 9. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: "Rodney" <w3krq@dejazzd.com>
- Date: Fri, 28 Dec 2012 21:40:49 -0500
- just send the board in to ten tec for capacitor replacement it is very small so easy to ship. 73 Rod --Original Message-- From: Peter Frenning [OZ1PIF] Sent: Friday, December 28, 2012 2:45 PM To: Dis
- /archives//html/TenTec/2012-12/msg00214.html (12,252 bytes)
- 10. Re: [TenTec] Orion II: nothing at startup (score: 1)
- Author: Richards <jruing@ameritech.net>
- Date: Fri, 28 Dec 2012 22:01:33 -0500
- Congratulations on a successful repair job - self-help and home repair is in the finest of ham tradition. There are few events which provide such a heady sense of self-satisfaction than a touchy repa
- /archives//html/TenTec/2012-12/msg00218.html (8,543 bytes)
This search system is powered by
Namazu