Version 2.032 software When operating my new Orion II this am Had terrible Noise with NB set to 2 , NR 3, Notch on and the SP set 3 and sweep on I then went notch C position rotating the Down from 10
Phil: I have had this problem also. Reported it to TT two months ago and have herd nothing. Please report it to TT . Gene WB9HLA -- Original Message -- From: <AI4DQ@aol.com> To: <tentec@contesting.co
This is an existing problem on the O2 that has not been addressed yet. I sent it to ditsnbits in late February and have not heard either. Report it, the more the merrier. 73, John NA9U ______________
Everyone is a lot of people :-) It's independent of Sweep, independent of SP. If NB is ON and NR is ON, it's only necessary to press the NOTCH button to cause it to fail. Grant/NQ5T ________________
setting to confirm Bug Condition setting on radio NB -on setting 2 NR-On setting 2 Notch setting C=1000 W=300 SP on 3 When rotate the notch down below 900hz radio will lose receive and will require a
Indeed, I see it here, too... Ron N6AHA _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
setting to confirm Bug My Orion I does not have this problem. K4ia "Buck" Fredericksburg, Virginia USA _______________________________________________ TenTec mailing list TenTec@contesting.com http:/
I'm on 2.031 and it doesn't happen. All's well with my O2. George _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinf
That is strange. This problem as been around since I got my Orion V2.029. It is not unique to 2.032. If its a bug it should happen on all rigs though. Are you sure you duplicated the steps? If so, go
Same problem here. Must be a "BUG"!! Makes one wonder how many other bugs there are like this. Maybe some "mathmatician amateur" can come with the total number of possible combinations that can be tr
Author: "Joseph A. & Ruth O. Ryan" <ablee@bellsouth.net>
Date: Sun, 02 Apr 2006 21:17:07 -0400
Nope! Ran my O2 as set up below all the way down to a Notch Setting of 20 and back around to 4000. Other than reducing the SSB signal's input by reducing the pass band....worked fine on 3.851. Still
Author: "Don and Diana Cunningham" <wb5hak@duracom.net>
Date: Sun, 2 Apr 2006 21:00:43 -0500
Phil, My Orion II on 2.032 does NOT exhibit that bug either. 73, Don, WB5HAK _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mail
I cannot get mine to reproduce your described situation. (not) sorry, I guess. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/ma
Phil, I have just purchased a new Orion II and have tried to reproduce your problem here. I have not been able to do so. 73...Don _______________________________________________ TenTec mailing list T
Phil, Mine did the same. Do a abttery reset, then a master reset...the problem never occured again _______________________________________________ TenTec mailing list TenTec@contesting.com http://lis
My OII does fail in this scenario. I just did a battery reset followed by a master reset and it still fails. My fails with just 3 steps: 1) Set NB to 2 2) Set NR to 2 3) Turn on manual notch and it f
My Orion with version 2.056 fails in this scenario. following steps: 1) Set NB to 2 2) Set NR to 2 3) Turn on manual notch and it fails I tried some different nrs and it did not fail. _______________
Me too! Great news is this is the kind of bug that is typically easy to fix because it is repeatable with a specific scenario. Anyone that has found it to be true and wants it fixed, sent e-mail to D
Phil, It does this here too. Both receiver A or B. The hardware noise blanker seems to work correctly with these settings so that might be a work around for your situation. Ron KA7U Version 2.032 sof