- 1. [TenTec] Problem with 705 mic (score: 1)
- Author: Mark Toussaint <n1mt@yahoo.com>
- Date: Sat, 13 Mar 2004 04:02:43 -0800 (PST)
- I recently purchased a used 705 mic and it has a problem. Before I send it back, I wanted to see if there are some suggestions you folks might have on its repair. 1. The mic came without a 9 volt bat
- /archives//html/TenTec/2004-03/msg00351.html (7,203 bytes)
- 2. Re: [TenTec] Problem with 705 mic (score: 1)
- Author: "Michael Melland, W9WIS" <w9wis@charter.net>
- Date: Sat, 13 Mar 2004 08:55:58 -0800
- Unless you are using the 705 on one of the pre Omni V rigs.... take the battery out. You don't need it as the voltage is provided from the 4 pin connector on the rig. Mike, W9WIS ____________________
- /archives//html/TenTec/2004-03/msg00358.html (6,928 bytes)
- 3. Re: [TenTec] Problem with 705 mic (score: 1)
- Author: Carter Grabarczyk <k8vt@ameritech.net>
- Date: Sat, 13 Mar 2004 09:59:55 -0500
- Mark Toussaint wrote: I recently purchased a used 705 mic and it has a problem. Before I send it back, I wanted to see if there are some suggestions you folks might have on its repair. 1. The mic cam
- /archives//html/TenTec/2004-03/msg00360.html (8,854 bytes)
- 4. Re: [TenTec] Problem with 705 mic (score: 1)
- Author: ac5e@comcast.net
- Date: Sat, 13 Mar 2004 19:05:59 +0000
- Mark, the 705 will work with voltage supplied through the mike plug on the front of your Ten-Tec radio. It's only needed if you use a 705 on a non - Ten Tec radio. So first take the battery out. Make
- /archives//html/TenTec/2004-03/msg00369.html (7,572 bytes)
- 5. Re: [TenTec] Problem with 705 mic (score: 1)
- Author: "Edward Crawford" <w4wvw@msn.com>
- Date: Sat, 13 Mar 2004 17:49:48 -0500
- There is a manual and schematic for the 705 mic available online as .pdf download at www.qsl.net/tentec/manuals<http://www.qsl.net/tentec/manuals> . Hope you have already got it working from all the
- /archives//html/TenTec/2004-03/msg00377.html (9,120 bytes)
This search system is powered by
Namazu