HI everyone, The TenTec is connected to a G5RV via a manual tuner, which all has been working very well for me. The problem now is, that folks are saying my audio is all garbled to a point where they
Check your coax. Dan/N4VET **Check out AOL's list of 2007's hottest products. (http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001) ______________________________________________
And check your microphone cable, especially for a bad ground or shield. _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/l
The symptoms sound like RF feedback via the microphone circuit. Since the problem just started occurring, look for disconnected cables, loose connections, corrosion, etc. The dummy load test suggests
Thanks all. There is a few things that I have not been able to check just yet, so with a bit of luck I will get that done tonight or tomorrow. I did check the microphone and cable, that seems to be f
KB8OCA.... You said "Even is my ALC What do you mean by "beeping"? Is it the CW monitor? If the CW monitor is being keyed in SSB (faulty switching transistor) you may be sending the tone along the au
Author: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Date: Tue, 04 Dec 2007 10:59:10 -0600
As has been mentioned, check coax and microphone, specifically check for broken shield connections. 73, Jerry, K0CQ _______________________________________________ TenTec mailing list TenTec@contesti
My guess would be the connection has failed between the coax, and your antenna, or the antenna has failed, and only one leg is still connected to the center insulator. Just a guess, but, again, the "