Author: David and Dianne on Comcast <dhhdeh@comcast.net>
Date: Sun, 18 Oct 2009 13:25:02 -0400
Hi All, I'm looking a 302R Remote Tuning Pod for my soon-to-arrive Omni VII. Does anyone have a nice one that is extra to their needs? Please reply off list. 73 de N1LQ-Dave dhhdeh@comcast.net ______
If it's the same as the one for the Orion I have one. It isn't "perfect" but is "nice", I don't use it and would send it out on approval. I have no idea what it is worth these days. _________________
Yes, the Orion and Omni VII (and also Jupiter/Pegasus) use the same pod. Carl Moreschi N4PY 121 Little Bell Drive Hays, NC 28635 www.n4py.com _______________________________________________ TenTec ma
Hi Carl, When I saw the recent postings about the 302 remote encoder it brought up a question that I have wondered about for some time. Before selling it, I originally used an Omni V with a 301 remot
I don't remember if the 301 knob had an adjustable drag on it or not. But if you run the O7 with my N4PY software, I have a software parameter you can set to adjust the knob sensitivity. This is an e
Really !?!?!? It works on mine! Maybe you just did not get the right feel when trying it. Check again, eh? == K8JHR == however I find that there is no way to adjust the on the Omni VII by holding the
Can you put the newer knob on the older device? I thought the drag adjustment was built into the knob, itself, and - if so - it would add that functionality to the older device, even if the older dev
Hi Jim, There is absolutely no drag adjustment on the knob on my 302 remote encoder. I took your advice and double checked by removing the knob. I looked at the back of the knob, nothing but plastic!
Author: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Date: Sun, 18 Oct 2009 17:53:50 -0600
There is a simple fix. If there is any surface to the back of the knob, insert a disk of felt and gently squeeze that between the knob and the panel. If one layer of felt won't fill the gap, use more
I've got a 302R that I picked up used in anticipation of getting an Omni VII. My 302 has the identical knob to my OPmni VI+'s and the friction adjustment works the same. Dave WA3MKB There is a simple
Yes. It does. == James - K8JHR == == _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec
I wonder if TT would send you a proper knob? I think you but a bum knob that is missing a part or two. The photo on the web site shows the silver skirt.... maybe yours is just missing it. See it here
Author: "James C. Owen, III" <k4cgy_list@yahoo.com>
Date: Sat, 24 Oct 2009 13:28:53 -0700 (PDT)
Also if the knob is not positioned on the shaft correctly the adjustment won't work. It may require that the knob be adjusted to be a little closer to the panel. Set for minimum and then position unt