Would like to know what controller or interface you are using. thanks, K1ZN _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailm
I have done it with my Orion II and US Interface Navigator, with MixW software. I have, however, switched to AFSK because it's more convenient -- I can move the TX/RX frequency by clicking on the des
Would like to know what controller or interface you are using. thanks, K1ZN I am using FSK with the Orion 565 (latest firmware). My controller is an LP printer connector adapter that I built some yea
I am running an Orion (565) FSK with a US Interface Navigator. 73, Rick VE7TK Website: http://www.ve7tk.com -- [TenTec] Who is doing true FSK with the ORION? Monday, July 05, 2010 10:46:07 From:<k1zn
My interface is Navigator by US Interface. I use MMTTY either stand-alone or embedded in WriteLog to operate RTTY. John, N9JG == Original Message == Date: Mon, 5 Jul 2010 13:46:07 -0400 From: <k1zn@c
Author: "David W LeJeune, Sr" <lejeuned@centurytel.net>
Date: Mon, 5 Jul 2010 16:04:02 -0500
Im doing it with an Orion II and an old Hal P38 Clover modem Card (not for Clover - just RTTY and PACTOR). Dave WN5V I have done it with my Orion II and US Interface Navigator, with MixW software. I
Good point Jerry. I'd completely forgotten about that. I too built my own but I just HATE those 7-pin DIN plugs! It is truly unfortunate T-T didn't include ALL the pins available on the AUX I/O conne
Using MicroHam DIGI KEYER with MixW software. MixW allows you to set up various Macro's to control most functions of the ORION via CAT control. Rgds Geoff - G0BYH ____________________________________